This IS the Avid L2

[Avid-L2] Re: Checking exported MXF Op1a files

2012-02-13T14:06:00.001-08:00

Well, FluidMorph sure did its work! Didn't notice it really.
good old Audio Tool caught my eye immediately :)

--- In Avid-L2@yahoogroups.com, "Job ter Burg (L2B)" <Job_L2@...> wrote:
>
>
> And thank heavens for FluidMorph (there were dozens in there).
>
> On 13 feb. 2012, at 21:59, Job ter Burg (L2B) wrote:
>
> > Hope you noticed the Audio Tool there in the end
>

__._,_.___

Reply to sender | Reply to group | Reply via web post | Start a New Topic

Messages in this topic (10)

Recent Activity:

New Members 6
New Files 1

Visit Your Group

Search the official Complete Avid-L archives at: http://archives.bengrosser.com/avid/

Switch to: Text-Only, Daily Digest • Unsubscribe • Terms of Use

__,_._,___

Re: [Avid-L2] Trying to purchase Compressor 3.5 - can't find it

2012-02-13T13:43:00.001-08:00

Just out of interest - what is wrong with v4 or what do you prefer in 3.5 (which I use a lot)? Not seen v4.

On 13 Feb 2012, at 20:38, David wrote:

> In the Apple store they are, AFAIK, only selling V4.0 - I'm looking to buy a copy of Compressor 3.5. Does anyone know if that's even available for purchase anymore ? And if so where ?
>
> Thanks
>
> Dave B
>
>

With best wishes,
Roger Shufflebottom
rogershuff@yahoo.co.uk
+44 7973 543 660

[Non-text portions of this message have been removed]

------------------------------------

Search the official Complete Avid-L archives at: http://archives.bengrosser.com/avid/
Yahoo! Groups Links

<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/Avid-L2/

<*> Your email settings:
Individual Email | Traditional

<*> To change settings online go to:
http://groups.yahoo.com/group/Avid-L2/join
(Yahoo! ID required)

<*> To change settings via email:
Avid-L2-digest@yahoogroups.com
Avid-L2-fullfeatured@yahoogroups.com

<*> To unsubscribe from this group, send an email to:
Avid-L2-unsubscribe@yahoogroups.com

<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/

Re: [Avid-L2] Checking exported MXF Op1a files

2012-02-13T13:25:00.001-08:00

And thank heavens for FluidMorph (there were dozens in there).

On 13 feb. 2012, at 21:59, Job ter Burg (L2B) wrote:

> Hope you noticed the Audio Tool there in the end

__._,_.___

Reply to sender | Reply to group | Reply via web post | Start a New Topic

Messages in this topic (9)

Recent Activity:

New Members 6
New Files 1

Visit Your Group

Search the official Complete Avid-L archives at: http://archives.bengrosser.com/avid/

Switch to: Text-Only, Daily Digest • Unsubscribe • Terms of Use

__,_._,___

Re: [Avid-L2] Trying to purchase Compressor 3.5 - can't find it

2012-02-13T13:19:00.001-08:00

I know of a couple options, neither them cheap.

Buy Apple Logic Studio, which apparently still includes Compressor 3.5
$450-$500 or so through established resellers, the online Apple Store

Buy Final Cut Studio 3 off of eBay (hmm...) or the upgrade via Amazon (well, sort of through Amazon), or another reseller:
$1000ish

Or learn to love Compressor 4 for $50.

Perhaps someone else here has a better suggestion.

Good luck

Jim Feeley
jfeeley@gmail.com

On Feb 13, 2012, at 12:38 PM, David wrote:

> In the Apple store they are, AFAIK, only selling V4.0 - I'm looking to buy a copy of Compressor 3.5. Does anyone know if that's even available for purchase anymore ? And if so where ?
>
> Thanks
>
> Dave B

__._,_.___

Reply to sender | Reply to group | Reply via web post | Start a New Topic

Messages in this topic (3)

Recent Activity:

New Members 6
New Files 1

Visit Your Group

Search the official Complete Avid-L archives at: http://archives.bengrosser.com/avid/

Switch to: Text-Only, Daily Digest • Unsubscribe • Terms of Use

__,_._,___

Re: [Avid-L2] Re: Checking exported MXF Op1a files

2012-02-13T12:59:00.001-08:00

On 13 feb. 2012, at 21:56, basvanschellen wrote:

> I often use VLC to do just a quick check of the Op1a files I exported, as noted earlier in this thread.
>
> On a different topic, I just saw the last episode of VPRO's 'Tegenlicht' and saw you on the credit roll, excellent work I must say! It's one of the dutch programs I'd love to edit.
>
> -Bas

Thanks Bas,

And that was the one I was trying to check before sending it out ;-)
I've cut many of those in the past, and after years of nearly never being available to cut for them (VPRO Backlight), it finally worked out last month.
Hope you noticed the Audio Tool there in the end ;-)

J

__._,_.___

Reply to sender | Reply to group | Reply via web post | Start a New Topic

Messages in this topic (8)

Recent Activity:

New Members 6
New Files 1

Visit Your Group

Search the official Complete Avid-L archives at: http://archives.bengrosser.com/avid/

Switch to: Text-Only, Daily Digest • Unsubscribe • Terms of Use

__,_._,___

[Avid-L2] Re: Checking exported MXF Op1a files

2012-02-13T12:56:00.001-08:00

I often use VLC to do just a quick check of the Op1a files I exported, as noted earlier in this thread.

On a different topic, I just saw the last episode of VPRO's 'Tegenlicht' and saw you on the credit roll, excellent work I must say! It's one of the dutch programs I'd love to edit.

-Bas

--- In Avid-L2@yahoogroups.com, "Job ter Burg (L2B)" <Job_L2@...> wrote:
>
> L.S.,
>
> Using MC6 and exporting a 1080i50 sequence as MXF Op1a MPEG50, 24bit, in order to supply to a public broadcaster. Want to check the result, by importing back into MC6. Works on the shorter clips, but when trying to import a 50 min. file, when the progress bar is at something like 20%, MC6 tells me there's a NO FRAME BOUNDARY error.
>
> Problem is: I don't know if the problem is in the export or the import. Besides tracking the bug, I'm just trying to make sure that my exported MXF will play at the broadcaster's end. Any tips how to play it back without importing into Avid?
>
> Thx
> Job.
>

__._,_.___

Reply to sender | Reply to group | Reply via web post | Start a New Topic

Messages in this topic (7)

Recent Activity:

New Members 6
New Files 1

Visit Your Group

Search the official Complete Avid-L archives at: http://archives.bengrosser.com/avid/

Switch to: Text-Only, Daily Digest • Unsubscribe • Terms of Use

__,_._,___

Re: [Avid-L2] Trying to purchase Compressor 3.5 - can't find it

2012-02-13T12:44:00.001-08:00

Unlikely - down the pan with FCP7 etc etc etc. Will v4 not do you?

On 13 Feb 2012, at 20:38, David wrote:

With best wishes,
Roger Shufflebottom
rogershuff@yahoo.co.uk
+44 7973 543 660

[Non-text portions of this message have been removed]

------------------------------------

Search the official Complete Avid-L archives at: http://archives.bengrosser.com/avid/
Yahoo! Groups Links

<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/Avid-L2/

<*> Your email settings:
Individual Email | Traditional

<*> To change settings online go to:
http://groups.yahoo.com/group/Avid-L2/join
(Yahoo! ID required)

<*> To change settings via email:
Avid-L2-digest@yahoogroups.com
Avid-L2-fullfeatured@yahoogroups.com

<*> To unsubscribe from this group, send an email to:
Avid-L2-unsubscribe@yahoogroups.com

<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/

[Avid-L2] Trying to purchase Compressor 3.5 - can't find it

2012-02-13T12:38:00.000-08:00

In the Apple store they are, AFAIK, only selling V4.0 - I'm looking to buy a copy of Compressor 3.5. Does anyone know if that's even available for purchase anymore ? And if so where ?

Thanks

Dave B

__._,_.___

Reply to sender | Reply to group | Reply via web post | Start a New Topic

Messages in this topic (1)

Recent Activity:

New Members 6
New Files 1

Visit Your Group

Search the official Complete Avid-L archives at: http://archives.bengrosser.com/avid/

Switch to: Text-Only, Daily Digest • Unsubscribe • Terms of Use

__,_._,___

[Avid-L2] Re: will MC 5.5 run on OSX 10.6.8 ??

2012-02-13T12:36:00.001-08:00

Good thing I asked -

Thank you Bogdan

Dave B

--- In Avid-L2@yahoogroups.com, Bogdan Grigoresco <bogdan_grigorescu@...> wrote:
>
> *MC version 5.5 supports OS version 10.6.5, 10.6.6
> *MC version 5.5.2 supports OS version 10.6.5, 10.6.6, 10.6.7
> *MC version 5.5.3 supports OS version 10.6.7, 10.6.8, 10.7 (Lion)
>
> cheers,
> Bogdan Grigoresco
> Sr.Engineer, ACSR DS/Unity
> www.finale.tv
>
>
> --- On Mon, 2/13/12, David <k27usa@...> wrote:
>
> From: David <k27usa@...>
> Subject: [Avid-L2] will MC 5.5 run on OSX 10.6.8 ??
> To: Avid-L2@yahoogroups.com
> Date: Monday, February 13, 2012, 11:45 AM
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
> Â
>
>
>
>
>
>
>
>
>
> Currently running MC 5.5.2 on a MBPro (2.53 Intel Core 2 Duo) with OSX 10.6.7 - I might need to upgrade to OS 10.6.8 - will this affect MC in anyway ?
>
> Will I need to re-authorize my Avid serial # ? or anything else troublesome like that ?
>
> I am in the middle of a project so naturally I am curious if its safe to do this upgrade ?
>
>
>
> Thanks
>
>
>
> DB
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
> [Non-text portions of this message have been removed]
>

__._,_.___

Reply to sender | Reply to group | Reply via web post | Start a New Topic

Messages in this topic (4)

Recent Activity:

New Members 6
New Files 1

Visit Your Group

Search the official Complete Avid-L archives at: http://archives.bengrosser.com/avid/

Switch to: Text-Only, Daily Digest • Unsubscribe • Terms of Use

__,_._,___

Re: [Avid-L2] Job Posting: San Antonio, TX

2012-02-13T12:16:00.001-08:00

I'd just like to know where the 3-5 years of experience standard came
from. I"m so sick of being told I'm "over experienced" or "not
specialized enough." "Sorry, but with your experience, we can't hire
you becuase you won't stay here at the wages we're paying..."

I'm sorry, but at 3-5 years of experience, I was just figuring out which
end of the camera to point at the subject, let alone have that list of
expeience.

<rant off...>

Mark

On 2/13/2012 1:17 PM, Curtis Nichols wrote:
>
> Sooo..... you don't have producers, graphic designers or lighting
> designers, but you need them.
>
>
> Curtis Nichols
> Señor Editor
> PCS Production Co.
>
> Irving, Tx.
> ------------------
>
> ________________________________
> From: lennie76 <lennie@fullnelsonproductions.net
> <mailto:lennie%40fullnelsonproductions.net>>
> To: Avid-L2@yahoogroups.com <mailto:Avid-L2%40yahoogroups.com>
> Sent: Monday, February 13, 2012 11:06 AM
> Subject: [Avid-L2] Job Posting: San Antonio, TX
>
> NewTek Inc. Emmy® Award-winning manufacturer of industry-leading video
> and 3D animation products including; TriCaster™, 3Play™ and LightWave
> 3D®. is currently seeking a creative Video Editor/Technical Director
> for our Video Production Department to shoot and edit compelling
> presentations for brand awareness, customer experience, product
> promotion, education and training. Projects include live stage
> presentations, customer case stories, webinars, promotional videos and
> commercials.
>
> The Video Editor/Technical director is responsible for all aspects of
> production for video projects including, technical approach, shot list
> creation, live production, webcasting, sound mixing, lighting design,
> audio/video editing and motion graphic design. The ideal candidate
> will have excellent communication skills, ability to interpret a
> treatment or script and shoot, edit and distribute a final video
> project. This position will work out of our San Antonio offices with
> some travel required for productions and trade shows.
>
> Duties
> Edit a wide range of video projects including promotional materials,
> training, elements for live productions and corporate communications.
> Assist with live productions, webcasts and corporate events
> Apply predetermined design specifications or develop original artistic
> treatments for video projects
> Design and create motion graphic elements
> Basic studio and field video camera work
> Audio production including music selection, recording and mixing
> Prepare final elements for compression and distribution
> Organization of media assets and master recordings.
>
> Requirements
> Strong non-linear editing experience
> Track record of editing a large amount of digital video/audio content
> Understanding of modern video and audio standards
> Understanding of video compression and digital distribution
> Live multi-camera production experience
> Media and asset management
> Motion graphic design
> Ability to support multiple projects simultaneously
> Strong communication and team working skills
>
> Qualifications
>
> The ideal candidate will have experience in the production and editing
> of high quality recorded and live video content for marketing,
> advertising, product demonstrations and training. The applicant must
> be knowledgeable in live video production, webcasting, video editing,
> motion graphics design, and 2D and 3D animation. Take ownership and
> drive the process of planning and coordination necessary to create and
> release new video projects. Work closely with the project stakeholders
> to gather and refine technical, operational and/or business
> requirements related to production, track/manage productions to
> successful completion, communicating status, issues, and risks to
> project stakeholders. Keep projects on schedule and within scope and
> budget, clearly present delivery timetables and keep them updated if
> going outside agreed completion times -- i.e., editing issues,
> equipment problems, not enough time budgeted, etc., manage the
> resolution of live-site
> technical and/or operational issues, select and manage external
> vendors as required, utilize project-planning tools to ensure timely
> completion of project tasks and deliverables with a high degree of
> quality, write documentation to aid project management of future
> projects, ensure all projects are well documented and that the
> documentation is available/updated as projects evolve/change and
> ensure all video and audio masters are easily identified and retrievable.
>
> Education/Experience
>
> Bachelor's degree (B.A.) and/or 3-5 years related experience.
> Experience in audio/visual production,
> Software Knowledge: Avid Media Composer or similar non-linear video
> editing programs, Adobe After Effects, Adobe Photoshop, Sorenson
> Squeeze or similar compression software
>
> [Non-text portions of this message have been removed]
>
>

--

---
Director, Owner
SR Film& Video Productions
195 W. Broad St.
Salunga PA 17538
717-393-5333
www.SR-Pro.com

[Non-text portions of this message have been removed]

__._,_.___

Reply to sender | Reply to group | Reply via web post | Start a New Topic

Messages in this topic (3)

Recent Activity:

New Members 6
New Files 1

Visit Your Group

Search the official Complete Avid-L archives at: http://archives.bengrosser.com/avid/

Switch to: Text-Only, Daily Digest • Unsubscribe • Terms of Use

__,_._,___

Re: [Avid-L2] will MC 5.5 run on OSX 10.6.8 ??

2012-02-13T11:56:00.001-08:00

*MC version 5.5 supports OS version 10.6.5, 10.6.6
*MC version 5.5.2 supports OS version 10.6.5, 10.6.6, 10.6.7
*MC version 5.5.3 supports OS version 10.6.7, 10.6.8, 10.7 (Lion)

cheers,
Bogdan Grigoresco
Sr.Engineer, ACSR DS/Unity
www.finale.tv

--- On Mon, 2/13/12, David <k27usa@yahoo.com> wrote:

From: David <k27usa@yahoo.com>
Subject: [Avid-L2] will MC 5.5 run on OSX 10.6.8 ??
To: Avid-L2@yahoogroups.com
Date: Monday, February 13, 2012, 11:45 AM

Currently running MC 5.5.2 on a MBPro (2.53 Intel Core 2 Duo) with OSX 10.6.7 - I might need to upgrade to OS 10.6.8 - will this affect MC in anyway ?

Will I need to re-authorize my Avid serial # ? or anything else troublesome like that ?

I am in the middle of a project so naturally I am curious if its safe to do this upgrade ?

Thanks

DB

[Non-text portions of this message have been removed]

__._,_.___

Reply to sender | Reply to group | Reply via web post | Start a New Topic

Messages in this topic (3)

Recent Activity:

New Members 6
New Files 1

Visit Your Group

Search the official Complete Avid-L archives at: http://archives.bengrosser.com/avid/

Switch to: Text-Only, Daily Digest • Unsubscribe • Terms of Use

__,_._,___

Re: [Avid-L2] will MC 5.5 run on OSX 10.6.8 ??

2012-02-13T11:53:00.000-08:00

I'm on 5.5.3 and 10.6.8.

According to the version matrix (
http://avid.custkb.com/avid/app/selfservice/search.jsp?DocId=267087&Hilite=version+matrix+Composer+Version+Matrix),
5.5.2 is not supported for 10.6.8. I'd deauthorize/uninstall 5.5.2, upgrade
the OS (via combo installer) and then install 5.5.3.

Should not be a need to worry about serial, provided you deauthorize first.

On Mon, Feb 13, 2012 at 2:45 PM, David <k27usa@yahoo.com> wrote:

> **
>
>
> Currently running MC 5.5.2 on a MBPro (2.53 Intel Core 2 Duo) with OSX
> 10.6.7 - I might need to upgrade to OS 10.6.8 - will this affect MC in
> anyway ?
> Will I need to re-authorize my Avid serial # ? or anything else
> troublesome like that ?
> I am in the middle of a project so naturally I am curious if its safe to
> do this upgrade ?
>
> Thanks
>
> DB
>
>
>

[Non-text portions of this message have been removed]

------------------------------------

Search the official Complete Avid-L archives at: http://archives.bengrosser.com/avid/
Yahoo! Groups Links

<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/Avid-L2/

<*> Your email settings:
Individual Email | Traditional

<*> To change settings online go to:
http://groups.yahoo.com/group/Avid-L2/join
(Yahoo! ID required)

<*> To change settings via email:
Avid-L2-digest@yahoogroups.com
Avid-L2-fullfeatured@yahoogroups.com

<*> To unsubscribe from this group, send an email to:
Avid-L2-unsubscribe@yahoogroups.com

<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/

[Avid-L2] will MC 5.5 run on OSX 10.6.8 ??

2012-02-13T11:45:00.001-08:00

Currently running MC 5.5.2 on a MBPro (2.53 Intel Core 2 Duo) with OSX 10.6.7 - I might need to upgrade to OS 10.6.8 - will this affect MC in anyway ?
Will I need to re-authorize my Avid serial # ? or anything else troublesome like that ?
I am in the middle of a project so naturally I am curious if its safe to do this upgrade ?

Thanks

DB

__._,_.___

Reply to sender | Reply to group | Reply via web post | Start a New Topic

Messages in this topic (1)

Recent Activity:

New Members 6
New Files 1

Visit Your Group

Search the official Complete Avid-L archives at: http://archives.bengrosser.com/avid/

Switch to: Text-Only, Daily Digest • Unsubscribe • Terms of Use

__,_._,___

Re: [Avid-L2] Job Posting: San Antonio, TX

2012-02-13T10:17:00.001-08:00

Sooo..... you don't have producers, graphic designers or lighting designers, but you need them.

Curtis Nichols
Señor Editor
PCS Production Co.

Irving, Tx.
------------------

________________________________
From: lennie76 <lennie@fullnelsonproductions.net>
To: Avid-L2@yahoogroups.com
Sent: Monday, February 13, 2012 11:06 AM
Subject: [Avid-L2] Job Posting: San Antonio, TX

NewTek Inc. Emmy® Award-winning manufacturer of industry-leading video and 3D animation products including; TriCaster™, 3Play™ and LightWave 3D®. is currently seeking a creative Video Editor/Technical Director for our Video Production Department to shoot and edit compelling presentations for brand awareness, customer experience, product promotion, education and training. Projects include live stage presentations, customer case stories, webinars, promotional videos and commercials.

The Video Editor/Technical director is responsible for all aspects of production for video projects including, technical approach, shot list creation, live production, webcasting, sound mixing, lighting design, audio/video editing and motion graphic design. The ideal candidate will have excellent communication skills, ability to interpret a treatment or script and shoot, edit and distribute a final video project. This position will work out of our San Antonio offices with some travel required for productions and trade shows.

Duties
Edit a wide range of video projects including promotional materials, training, elements for live productions and corporate communications.
Assist with live productions, webcasts and corporate events
Apply predetermined design specifications or develop original artistic treatments for video projects
Design and create motion graphic elements
Basic studio and field video camera work
Audio production including music selection, recording and mixing
Prepare final elements for compression and distribution
Organization of media assets and master recordings.

Requirements
Strong non-linear editing experience
Track record of editing a large amount of digital video/audio content
Understanding of modern video and audio standards
Understanding of video compression and digital distribution
Live multi-camera production experience
Media and asset management
Motion graphic design
Ability to support multiple projects simultaneously
Strong communication and team working skills

Qualifications

The ideal candidate will have experience in the production and editing of high quality recorded and live video content for marketing, advertising, product demonstrations and training. The applicant must be knowledgeable in live video production, webcasting, video editing, motion graphics design, and 2D and 3D animation. Take ownership and drive the process of planning and coordination necessary to create and release new video projects. Work closely with the project stakeholders to gather and refine technical, operational and/or business requirements related to production, track/manage productions to successful completion, communicating status, issues, and risks to project stakeholders. Keep projects on schedule and within scope and budget, clearly present delivery timetables and keep them updated if going outside agreed completion times -- i.e., editing issues, equipment problems, not enough time budgeted, etc., manage the resolution of live-site
technical and/or operational issues, select and manage external vendors as required, utilize project-planning tools to ensure timely completion of project tasks and deliverables with a high degree of quality, write documentation to aid project management of future projects, ensure all projects are well documented and that the documentation is available/updated as projects evolve/change and ensure all video and audio masters are easily identified and retrievable.

Education/Experience

Bachelor's degree (B.A.) and/or 3-5 years related experience. Experience in audio/visual production,
Software Knowledge: Avid Media Composer or similar non-linear video editing programs, Adobe After Effects, Adobe Photoshop, Sorenson Squeeze or similar compression software

[Non-text portions of this message have been removed]

__._,_.___

Reply to sender | Reply to group | Reply via web post | Start a New Topic

Messages in this topic (2)

Recent Activity:

New Members 6
New Files 1

Visit Your Group

Search the official Complete Avid-L archives at: http://archives.bengrosser.com/avid/

Switch to: Text-Only, Daily Digest • Unsubscribe • Terms of Use

__,_._,___

[Avid-L2] Job Posting: San Antonio, TX

2012-02-13T09:06:00.001-08:00

NewTek Inc. Emmy® Award-winning manufacturer of industry-leading video and 3D animation products including; TriCaster, 3Play and LightWave 3D®. is currently seeking a creative Video Editor/Technical Director for our Video Production Department to shoot and edit compelling presentations for brand awareness, customer experience, product promotion, education and training. Projects include live stage presentations, customer case stories, webinars, promotional videos and commercials.

The Video Editor/Technical director is responsible for all aspects of production for video projects including, technical approach, shot list creation, live production, webcasting, sound mixing, lighting design, audio/video editing and motion graphic design. The ideal candidate will have excellent communication skills, ability to interpret a treatment or script and shoot, edit and distribute a final video project. This position will work out of our San Antonio offices with some travel required for productions and trade shows.

Duties
Edit a wide range of video projects including promotional materials, training, elements for live productions and corporate communications.
Assist with live productions, webcasts and corporate events
Apply predetermined design specifications or develop original artistic treatments for video projects
Design and create motion graphic elements
Basic studio and field video camera work
Audio production including music selection, recording and mixing
Prepare final elements for compression and distribution
Organization of media assets and master recordings.

Requirements
Strong non-linear editing experience
Track record of editing a large amount of digital video/audio content
Understanding of modern video and audio standards
Understanding of video compression and digital distribution
Live multi-camera production experience
Media and asset management
Motion graphic design
Ability to support multiple projects simultaneously
Strong communication and team working skills

Qualifications

The ideal candidate will have experience in the production and editing of high quality recorded and live video content for marketing, advertising, product demonstrations and training. The applicant must be knowledgeable in live video production, webcasting, video editing, motion graphics design, and 2D and 3D animation. Take ownership and drive the process of planning and coordination necessary to create and release new video projects. Work closely with the project stakeholders to gather and refine technical, operational and/or business requirements related to production, track/manage productions to successful completion, communicating status, issues, and risks to project stakeholders. Keep projects on schedule and within scope and budget, clearly present delivery timetables and keep them updated if going outside agreed completion times -- i.e., editing issues, equipment problems, not enough time budgeted, etc., manage the resolution of live-site technical and/or operational issues, select and manage external vendors as required, utilize project-planning tools to ensure timely completion of project tasks and deliverables with a high degree of quality, write documentation to aid project management of future projects, ensure all projects are well documented and that the documentation is available/updated as projects evolve/change and ensure all video and audio masters are easily identified and retrievable.

Education/Experience

Bachelor's degree (B.A.) and/or 3-5 years related experience. Experience in audio/visual production,
Software Knowledge: Avid Media Composer or similar non-linear video editing programs, Adobe After Effects, Adobe Photoshop, Sorenson Squeeze or similar compression software

Please send resume and demo reel link to lnelson@newtek.com.

__._,_.___

Reply to sender | Reply to group | Reply via web post | Start a New Topic

Messages in this topic (1)

Recent Activity:

New Members 6
New Files 1

Visit Your Group

Search the official Complete Avid-L archives at: http://archives.bengrosser.com/avid/

Switch to: Text-Only, Daily Digest • Unsubscribe • Terms of Use

__,_._,___

Re: [Avid-L2] Re: [OT] - Editor Humor (for Roger that'd be Humour)

2012-02-12T10:27:00.001-08:00

"Dude, dude, They hired a girl"

On Sun, Feb 12, 2012 at 1:25 PM, dave_harrison_edit <davealbumania@yahoo.com
> wrote:

> **
>
>
> It's funny because it's true!
>
> --- In Avid-L2@yahoogroups.com, Tim McLaughlin <mcltim.156@...> wrote:
>
> >
> > On Fri, Feb 10, 2012 at 2:15 PM, David Ross <speckydave@...> wrote:
> >
> > > **
> > >
> > >
> > > There's already a "shit VFX artists say" going around that's worth a
> look.
> > >
> >
> > http://www.youtube.com/watch?v=QEkuHBpvJw0
> >
> >
> > Pretty much fits for editors too...
> >
> > --
> > Tim McLaughlin
> > Final Cut and Avid Editor
> > http://vimeo.com/mcltim
> > www.mcltim.com
> >
> >
> > [Non-text portions of this message have been removed]
> >
>
>
>

[Non-text portions of this message have been removed]

------------------------------------

Search the official Complete Avid-L archives at: http://archives.bengrosser.com/avid/
Yahoo! Groups Links

<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/Avid-L2/

<*> Your email settings:
Individual Email | Traditional

<*> To change settings online go to:
http://groups.yahoo.com/group/Avid-L2/join
(Yahoo! ID required)

<*> To change settings via email:
Avid-L2-digest@yahoogroups.com
Avid-L2-fullfeatured@yahoogroups.com

<*> To unsubscribe from this group, send an email to:
Avid-L2-unsubscribe@yahoogroups.com

<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/

[Avid-L2] Re: [OT] - Editor Humor (for Roger that'd be Humour)

2012-02-12T10:25:00.001-08:00

It's funny because it's true!

--- In Avid-L2@yahoogroups.com, Tim McLaughlin <mcltim.156@...> wrote:
>
> On Fri, Feb 10, 2012 at 2:15 PM, David Ross <speckydave@...> wrote:
>
> > **
> >
> >
> > There's already a "shit VFX artists say" going around that's worth a look.
> >
>
> http://www.youtube.com/watch?v=QEkuHBpvJw0
>
>
> Pretty much fits for editors too...
>
> --
> Tim McLaughlin
> Final Cut and Avid Editor
> http://vimeo.com/mcltim
> www.mcltim.com
>
>
> [Non-text portions of this message have been removed]
>

__._,_.___

Reply to sender | Reply to group | Reply via web post | Start a New Topic

Messages in this topic (5)

Recent Activity:

New Members 6
New Files 1

Visit Your Group

Search the official Complete Avid-L archives at: http://archives.bengrosser.com/avid/

Switch to: Text-Only, Daily Digest • Unsubscribe • Terms of Use

__,_._,___

[Avid-L2] Re: Seagate Go flex issues

2012-02-12T10:18:00.001-08:00

I don't have this drive, but I was wondering if it'd be worth your while & ultimately easier to crack open the enclosure and use it as a bare drive instead if you can't find a resolution. If you're using a Mac Pro with an open bay, pop it in there or maybe pick up a drive dock or WiebeTech. My philosophy is that if you're getting errors that make no sense, you could be walking through the door to actual transfer errors or corruptions and compromising your data.

--Dave

--- In Avid-L2@yahoogroups.com, "David" <k27usa@...> wrote:
>
> Lou - we've been using GoFlex for Mac, 2TB (both the silver & the black ones) for some of our "remote" based projects and have NOT had only so-so luck with them. It's ironic because I have just now returned from my local Apple store where I just picked up a Hitachi G-Tech 2TB drive, as we are experiencing very similar issues with a GoFlex for Mac, 2TB (silver color) using the same specs as you, FW 800.
> FWIW, the 'silver' ones seem FAR MORE problematic than the BLACK ones do.
>
> Sorry I can't offer any more specific info, just know you're not alone with the Seagate GoFlex dive issues. I've also seen posts here on the L that basically say the same thing - avoid the Seagate GoFlex drives whenever possible.
>
> Good Luck,
>
>
> Dave B
>
>
> --- In Avid-L2@yahoogroups.com, Lou Wirth <loutv@> wrote:
> >
> > I just got a Seagate, GoFlex for Mac, 3TB to dump some overflow media onto for a while. Trying to copy media mover offline folder. Right now about 750 Gigs. But it only goes for a few minutes and then it stops giving me the "media mover can't copy, files in use" error.
> >
> > Not sure if this is a file size issue or drive issue. Firewire 800 connection. After that error, if I go to dump the files, I get "error -50) Have to restart to dump the files off the seagate.
> >
> > Drive was formatted with Mac Drive utility.
> >
> > thanks
> > Lou
> > Lou Wirth Productions
> > 500Tamal Plaza, Suite 522
> > Corte Madera, CA 94925
> > www.louwirth.com
> > 415-924-9411p
> >
>

__._,_.___

Reply to sender | Reply to group | Reply via web post | Start a New Topic

Messages in this topic (4)

Recent Activity:

New Members 6
New Files 1

Visit Your Group

Search the official Complete Avid-L archives at: http://archives.bengrosser.com/avid/

Switch to: Text-Only, Daily Digest • Unsubscribe • Terms of Use

__,_._,___

Re: [Avid-L2] Re: Anti Virus for MAC recommendations

2012-02-12T08:04:00.001-08:00

I'm running Symantec. No conflicts. We're only have one suite though,
so there's no central administration.

Mark

Owner, Director
SR Film & Video Productions
195 W Broad St
Salunga PA 17538
717-393-5333 ex 142
www.SR-Pro.com <http://www.sr-pro.com>

Follow us on Facebook
<http://www.facebook.com/pages/Salunga-PA/SR-Film-Video-Productions/132001820445>
Linked In <http://www.linkedin.com/pub/mark-myers/8/488/746>
Twitter <http://twitter.com/SRProductions>

On 2/12/12 6:08 AM, Pat Horridge wrote:
>
> I use Sophos. They have cross platform support and a great central
> admin control. We use it across the whole company.
>
> Sent from Pat's iPhone
>
>

[Non-text portions of this message have been removed]

__._,_.___

Reply to sender | Reply to group | Reply via web post | Start a New Topic

Messages in this topic (3)

Recent Activity:

New Members 6
New Files 1

Visit Your Group

Search the official Complete Avid-L archives at: http://archives.bengrosser.com/avid/

Switch to: Text-Only, Daily Digest • Unsubscribe • Terms of Use

__,_._,___

Re: [Avid-L2] Re: Was Can't resize Timeline Window. Now 6.0.1 TT weirdness.

2012-02-12T05:41:00.001-08:00

Editing tutorials... for a quick title that just fades up and down.
and development testing ;-)

On Sat, Feb 11, 2012 at 8:24 PM, Terence Curren <tcurren@aol.com> wrote:

> **
>
>
> Jeff, the bigger question is, with all the tools at your disposal, why are
> you mucking about in title tool?
>
>
> --- In Avid-L2@yahoogroups.com, Jeff Krebs <rockinjeff@...> wrote:
> >
> > You are correct -
> > 100% repeatable
> >
> > On Sat, Feb 11, 2012 at 12:30 PM, Roger <rogershuff@...> wrote:
> >
> > > **
>
> > >
> > >
> > > Ah - or is it? On two Macs (one on 10.6.8 and one on 10.7.2) I find
> that
> > > the settings for the first graphic object in the Avid TT stay around
> for
> > > any other objects. If I make some text, change the fill colour, add a
> > > border and a shadow etc, when I deselect that object and start a new
> one,
> > > the same settings are applied so each parameter has to be reset. In
> earlier
> > > versions this only happened if you changed parameters with the
> selection
> > > tool active but no object selected. This is a right PITA, especially
> the
> > > shadow as if softness has been applied, it means going into the Object
> menu
> > > and setting the value to zero.
> > >
> > > On 11 Feb 2012, at 14:39, Jeff Krebs wrote:
> > >
> > > > At least title tool was fixed - could not access the controls in the
> 6.0
> > > > release
> > >
> >
> >
> > [Non-text portions of this message have been removed]
> >
>
>
>

[Non-text portions of this message have been removed]

------------------------------------

Search the official Complete Avid-L archives at: http://archives.bengrosser.com/avid/
Yahoo! Groups Links

<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/Avid-L2/

<*> Your email settings:
Individual Email | Traditional

<*> To change settings online go to:
http://groups.yahoo.com/group/Avid-L2/join
(Yahoo! ID required)

<*> To change settings via email:
Avid-L2-digest@yahoogroups.com
Avid-L2-fullfeatured@yahoogroups.com

<*> To unsubscribe from this group, send an email to:
Avid-L2-unsubscribe@yahoogroups.com

<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/

[Avid-L2] Re: Anti Virus for MAC recommendations

2012-02-12T03:07:00.000-08:00

I use Sophos. They have cross platform support and a great central admin control. We use it across the whole company.

Sent from Pat's iPhone

__._,_.___

Reply to sender | Reply to group | Reply via web post | Start a New Topic

Messages in this topic (2)

Recent Activity:

New Members 6
New Files 1

Visit Your Group

Search the official Complete Avid-L archives at: http://archives.bengrosser.com/avid/

Switch to: Text-Only, Daily Digest • Unsubscribe • Terms of Use

__,_._,___

[Avid-L2] Anti Virus for MAC recommendations

2012-02-12T00:26:00.000-08:00

What are media composer users using for Anti-virus on MAC these days?

gh
----------------------------------------------------
Greg Huson
Secret Headquarters, Inc
Post Production / Production
Culver City, CA
323 677 2092
www.DigitalServiceStation.com
greg (at) SecretHQ.com
facebook.com/greg.huson
www.SecretHQ.com

__._,_.___

Reply to sender | Reply to group | Reply via web post | Start a New Topic

Messages in this topic (1)

Recent Activity:

New Members 6
New Files 1

Visit Your Group

Search the official Complete Avid-L archives at: http://archives.bengrosser.com/avid/

Switch to: Text-Only, Daily Digest • Unsubscribe • Terms of Use

__,_._,___

Re: [Avid-L2] Checking exported MXF Op1a files

2012-02-11T18:54:00.001-08:00

On Feb 11, 2012, at 3:47 PM, Job ter Burg (L2B) wrote:

> Works on the shorter clips, but when trying to import a 50 min. file, when the progress bar is at something like 20%, MC6 tells me there's a NO FRAME BOUNDARY error.

Back in ancient (AVR) days, that error would occasionally pop when the Avid was trying to close the first segment of a multi-segment file during digitize / capture. For example, digitizing rather noisy or complex footage at AVR 75 or AVR 77 might bail after just a few minutes with that NO FRAME BOUNDARY error -- and the numbers were right in the ballpark of where that first 2GB chunk would end and the second would start.

Sounds suspiciously similar… and I'll bet a dollar the problem is on import.

BYTEmonkeys
Creativity for your Creative
http://bytemonkeys.tv
692 N. High St., Suite 304
Columbus, OH 43215
614.824.1685

------------------------------------

Search the official Complete Avid-L archives at: http://archives.bengrosser.com/avid/
Yahoo! Groups Links

<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/Avid-L2/

<*> Your email settings:
Individual Email | Traditional

<*> To change settings online go to:
http://groups.yahoo.com/group/Avid-L2/join
(Yahoo! ID required)

<*> To change settings via email:
Avid-L2-digest@yahoogroups.com
Avid-L2-fullfeatured@yahoogroups.com

<*> To unsubscribe from this group, send an email to:
Avid-L2-unsubscribe@yahoogroups.com

<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/

[Avid-L2] Re: Was Can't resize Timeline Window. Now 6.0.1 TT weirdness.

2012-02-11T17:24:00.001-08:00

Jeff, the bigger question is, with all the tools at your disposal, why are you mucking about in title tool?

--- In Avid-L2@yahoogroups.com, Jeff Krebs <rockinjeff@...> wrote:
>
> You are correct -
> 100% repeatable
>
> On Sat, Feb 11, 2012 at 12:30 PM, Roger <rogershuff@...> wrote:
>
> > **
> >
> >
> > Ah - or is it? On two Macs (one on 10.6.8 and one on 10.7.2) I find that
> > the settings for the first graphic object in the Avid TT stay around for
> > any other objects. If I make some text, change the fill colour, add a
> > border and a shadow etc, when I deselect that object and start a new one,
> > the same settings are applied so each parameter has to be reset. In earlier
> > versions this only happened if you changed parameters with the selection
> > tool active but no object selected. This is a right PITA, especially the
> > shadow as if softness has been applied, it means going into the Object menu
> > and setting the value to zero.
> >
> > On 11 Feb 2012, at 14:39, Jeff Krebs wrote:
> >
> > > At least title tool was fixed - could not access the controls in the 6.0
> > > release
> >
>
>
> [Non-text portions of this message have been removed]
>

__._,_.___

Reply to sender | Reply to group | Reply via web post | Start a New Topic

Messages in this topic (17)

Recent Activity:

New Members 6
New Files 1

Visit Your Group

Search the official Complete Avid-L archives at: http://archives.bengrosser.com/avid/

Switch to: Text-Only, Daily Digest • Unsubscribe • Terms of Use

__,_._,___

Re: [Avid-L2] Checking exported MXF Op1a files

2012-02-11T15:44:00.001-08:00

Or use the Sony viewer (free, for mac and win), and / or use FCP an import
it there :-)
Or send it to the broadcaster, they check it anyways (automatic checks).

Bouke

VideoToolShed
van Oldenbarneveltstraat 33
6512 AS NIJMEGEN
The Netherlands
+31 24 3553311
www.videotoolshed.com
For large files:
http://dropbox.yousendit.com/BoukeVahl998172

----- Original Message -----
From: "Agustin Goya" <agustingoya@gmail.com>
To: <Avid-L2@yahoogroups.com>
Sent: Sunday, February 12, 2012 12:41 AM
Subject: RE: [Avid-L2] Checking exported MXF Op1a files

You could play the file with vlc or ffplay and check if something weird
appears during payback.
Just a thought.

Sent from my phone
-----Original Message-----
From: Job ter Burg (L2B)
Sent: 11/02/2012 18:47:51
Subject: [Avid-L2] Checking exported MXF Op1a files

L.S.,

Using MC6 and exporting a 1080i50 sequence as MXF Op1a MPEG50, 24bit, in
order to supply to a public broadcaster. Want to check the result, by
importing back into MC6. Works on the shorter clips, but when trying to
import a 50 min. file, when the progress bar is at something like 20%, MC6
tells me there's a NO FRAME BOUNDARY error.

Problem is: I don't know if the problem is in the export or the import.
Besides tracking the bug, I'm just trying to make sure that my exported MXF
will play at the broadcaster's end. Any tips how to play it back without
importing into Avid?

Thx
Job.

__._,_.___

Reply to sender | Reply to group | Reply via web post | Start a New Topic

Messages in this topic (5)

Recent Activity:

New Members 6
New Files 1

Visit Your Group

Search the official Complete Avid-L archives at: http://archives.bengrosser.com/avid/

Switch to: Text-Only, Daily Digest • Unsubscribe • Terms of Use

__,_._,___

RE: [Avid-L2] Checking exported MXF Op1a files

2012-02-11T15:41:00.001-08:00

You could play the file with vlc or ffplay and check if something weird appears during payback.
Just a thought.

Sent from my phone
-----Original Message-----
From: Job ter Burg (L2B)
Sent: 11/02/2012 18:47:51
Subject: [Avid-L2] Checking exported MXF Op1a files

L.S.,

Using MC6 and exporting a 1080i50 sequence as MXF Op1a MPEG50, 24bit, in order to supply to a public broadcaster. Want to check the result, by importing back into MC6. Works on the shorter clips, but when trying to import a 50 min. file, when the progress bar is at something like 20%, MC6 tells me there's a NO FRAME BOUNDARY error.

Problem is: I don't know if the problem is in the export or the import. Besides tracking the bug, I'm just trying to make sure that my exported MXF will play at the broadcaster's end. Any tips how to play it back without importing into Avid?

Thx
Job.

__._,_.___

Reply to sender | Reply to group | Reply via web post | Start a New Topic

Messages in this topic (4)

Recent Activity:

New Members 6
New Files 1

Visit Your Group

Search the official Complete Avid-L archives at: http://archives.bengrosser.com/avid/

Switch to: Text-Only, Daily Digest • Unsubscribe • Terms of Use

__,_._,___

Re: [Avid-L2] Was Can't resize Timeline Window. Now 6.0.1 TT weirdness.

2012-02-11T14:26:00.000-08:00

same code I guess - I'm on Windowz

On Sat, Feb 11, 2012 at 4:12 PM, Roger <rogershuff@yahoo.co.uk> wrote:
> Thanks for the confirmation.
>
> On 11 Feb 2012, at 20:48, Jeff Krebs wrote:
>
>> You are correct -
>> 100% repeatable
>>
>> On Sat, Feb 11, 2012 at 12:30 PM, Roger <rogershuff@yahoo.co.uk> wrote:
>>
>> > **
>> >
>> >
>> > Ah - or is it? On two Macs (one on 10.6.8 and one on 10.7.2) I find that
>> > the settings for the first graphic object in the Avid TT stay around for
>> > any other objects. If I make some text, change the fill colour, add a
>> > border and a shadow etc, when I deselect that object and start a new one,
>> > the same settings are applied so each parameter has to be reset. In earlier
>> > versions this only happened if you changed parameters with the selection
>> > tool active but no object selected. This is a right PITA, especially the
>> > shadow as if softness has been applied, it means going into the Object menu
>> > and setting the value to zero.
>> >
>> > On 11 Feb 2012, at 14:39, Jeff Krebs wrote:
>> >
>> > > At least title tool was fixed - could not access the controls in the 6.0
>> > > release
>> >
>>
>> [Non-text portions of this message have been removed]
>>
>>
>
> With best wishes,
> Roger Shufflebottom
> rogershuff@yahoo.co.uk
> +44 7973 543 660
>
>
>
>
>
>
> [Non-text portions of this message have been removed]
>
>
>
> ------------------------------------
>
> Search the official Complete Avid-L archives at: http://archives.bengrosser.com/avid/
> Yahoo! Groups Links
>
>
>

__._,_.___

Reply to sender | Reply to group | Reply via web post | Start a New Topic

Messages in this topic (16)

Recent Activity:

New Members 6
New Files 1

Visit Your Group

Search the official Complete Avid-L archives at: http://archives.bengrosser.com/avid/

Switch to: Text-Only, Daily Digest • Unsubscribe • Terms of Use

__,_._,___

Re: [Avid-L2] Checking exported MXF Op1a files

2012-02-11T13:19:00.001-08:00

Thanks Robert.

> I'm assuming you want some sort of actual monitor output and audio meters
> and scopes and all that good stuff.

Not really, as that has all been verified and lined up. Just want to make sure the file plays back.

> If not, you can certainly use the Sony Clip Browser program.

Will try that too.
Also, I found I can AMA-link to the exported MXF. That works. Not sure why the export is not working.

J

__._,_.___

Reply to sender | Reply to group | Reply via web post | Start a New Topic

Messages in this topic (3)

Recent Activity:

New Members 6
New Files 1

Visit Your Group

Search the official Complete Avid-L archives at: http://archives.bengrosser.com/avid/

Switch to: Text-Only, Daily Digest • Unsubscribe • Terms of Use

__,_._,___

Re: [Avid-L2] Was Can't resize Timeline Window. Now 6.0.1 TT weirdness.

2012-02-11T13:12:00.001-08:00

Thanks for the confirmation.

On 11 Feb 2012, at 20:48, Jeff Krebs wrote:

> You are correct -
> 100% repeatable
>
> On Sat, Feb 11, 2012 at 12:30 PM, Roger <rogershuff@yahoo.co.uk> wrote:
>
> > **
> >
> >
> > Ah - or is it? On two Macs (one on 10.6.8 and one on 10.7.2) I find that
> > the settings for the first graphic object in the Avid TT stay around for
> > any other objects. If I make some text, change the fill colour, add a
> > border and a shadow etc, when I deselect that object and start a new one,
> > the same settings are applied so each parameter has to be reset. In earlier
> > versions this only happened if you changed parameters with the selection
> > tool active but no object selected. This is a right PITA, especially the
> > shadow as if softness has been applied, it means going into the Object menu
> > and setting the value to zero.
> >
> > On 11 Feb 2012, at 14:39, Jeff Krebs wrote:
> >
> > > At least title tool was fixed - could not access the controls in the 6.0
> > > release
> >
>
> [Non-text portions of this message have been removed]
>
>

With best wishes,
Roger Shufflebottom
rogershuff@yahoo.co.uk
+44 7973 543 660

[Non-text portions of this message have been removed]

------------------------------------

Search the official Complete Avid-L archives at: http://archives.bengrosser.com/avid/
Yahoo! Groups Links

<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/Avid-L2/

<*> Your email settings:
Individual Email | Traditional

<*> To change settings online go to:
http://groups.yahoo.com/group/Avid-L2/join
(Yahoo! ID required)

<*> To change settings via email:
Avid-L2-digest@yahoogroups.com
Avid-L2-fullfeatured@yahoogroups.com

<*> To unsubscribe from this group, send an email to:
Avid-L2-unsubscribe@yahoogroups.com

<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/

Re: [Avid-L2] Checking exported MXF Op1a files

2012-02-11T13:01:00.001-08:00

I'm assuming you want some sort of actual monitor output and audio meters
and scopes and all that good stuff.

If not, you can certainly use the Sony Clip Browser program. If you do need
real monitoring, then the only solution I've come across is to export that
file to a Sony XDCAM disc and play back in a PDWHD 1500 deck.

---
Rob Lawson
System Administrator, ACSR ISIS, Windows & Interplay
CBS News

On Sat, Feb 11, 2012 at 3:47 PM, Job ter Burg (L2B) <Job_L2@terburg.com>wrote:

> **
>
>
> L.S.,
>
> Using MC6 and exporting a 1080i50 sequence as MXF Op1a MPEG50, 24bit, in
> order to supply to a public broadcaster. Want to check the result, by
> importing back into MC6. Works on the shorter clips, but when trying to
> import a 50 min. file, when the progress bar is at something like 20%, MC6
> tells me there's a NO FRAME BOUNDARY error.
>
> Problem is: I don't know if the problem is in the export or the import.
> Besides tracking the bug, I'm just trying to make sure that my exported MXF
> will play at the broadcaster's end. Any tips how to play it back without
> importing into Avid?
>
> Thx
> Job.
>
>

[Non-text portions of this message have been removed]

------------------------------------

Search the official Complete Avid-L archives at: http://archives.bengrosser.com/avid/
Yahoo! Groups Links

<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/Avid-L2/

<*> Your email settings:
Individual Email | Traditional

<*> To change settings online go to:
http://groups.yahoo.com/group/Avid-L2/join
(Yahoo! ID required)

<*> To change settings via email:
Avid-L2-digest@yahoogroups.com
Avid-L2-fullfeatured@yahoogroups.com

<*> To unsubscribe from this group, send an email to:
Avid-L2-unsubscribe@yahoogroups.com

<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/

Re: [Avid-L2] Was Can't resize Timeline Window. Now 6.0.1 TT weirdness.

2012-02-11T12:48:00.001-08:00

You are correct -
100% repeatable

On Sat, Feb 11, 2012 at 12:30 PM, Roger <rogershuff@yahoo.co.uk> wrote:

> **
>
>
> Ah - or is it? On two Macs (one on 10.6.8 and one on 10.7.2) I find that
> the settings for the first graphic object in the Avid TT stay around for
> any other objects. If I make some text, change the fill colour, add a
> border and a shadow etc, when I deselect that object and start a new one,
> the same settings are applied so each parameter has to be reset. In earlier
> versions this only happened if you changed parameters with the selection
> tool active but no object selected. This is a right PITA, especially the
> shadow as if softness has been applied, it means going into the Object menu
> and setting the value to zero.
>
> On 11 Feb 2012, at 14:39, Jeff Krebs wrote:
>
> > At least title tool was fixed - could not access the controls in the 6.0
> > release
>

[Non-text portions of this message have been removed]

__._,_.___

Reply to sender | Reply to group | Reply via web post | Start a New Topic

Messages in this topic (14)

Recent Activity:

New Members 6
New Files 1

Visit Your Group

Search the official Complete Avid-L archives at: http://archives.bengrosser.com/avid/

Switch to: Text-Only, Daily Digest • Unsubscribe • Terms of Use

__,_._,___

[Avid-L2] Checking exported MXF Op1a files

2012-02-11T12:47:00.000-08:00

L.S.,

Using MC6 and exporting a 1080i50 sequence as MXF Op1a MPEG50, 24bit, in order to supply to a public broadcaster. Want to check the result, by importing back into MC6. Works on the shorter clips, but when trying to import a 50 min. file, when the progress bar is at something like 20%, MC6 tells me there's a NO FRAME BOUNDARY error.

Problem is: I don't know if the problem is in the export or the import. Besides tracking the bug, I'm just trying to make sure that my exported MXF will play at the broadcaster's end. Any tips how to play it back without importing into Avid?

Thx
Job.

__._,_.___

Reply to sender | Reply to group | Reply via web post | Start a New Topic

Messages in this topic (1)

Recent Activity:

New Members 6
New Files 1

Visit Your Group

Search the official Complete Avid-L archives at: http://archives.bengrosser.com/avid/

Switch to: Text-Only, Daily Digest • Unsubscribe • Terms of Use

__,_._,___

Re: [Avid-L2] Should Google buy Avid...

2012-02-11T11:17:00.000-08:00

Nicely played, sir.

- Rich :-)

At 10:08 AM 2/10/2012 -0800, you wrote:
>First thing they would do is bring the old "Lift" button back. Then after
>you use it 20 times you would start seeing ads for gym memberships showing
>up in the title tool.
>
>One could only imagine what type of ads would start showing up after over
>use of the "Trim Tail" button!
>
>Mike
>M2 Digital Post
>San Diego, CA.
>
>
>
>On Feb 10, 2012, at 8:32 AM, Terence Curren wrote:
>
> > Forbes thinks so.
> >
> > http://tinyurl.com/87egtnb
> >
> >
>
>
>
>[Non-text portions of this message have been removed]
>
>
>
>------------------------------------
>
>Search the official Complete Avid-L archives
>at: http://archives.bengrosser.com/avid/
>Yahoo! Groups Links
>
>
>

__._,_.___

Reply to sender | Reply to group | Reply via web post | Start a New Topic

Messages in this topic (8)

Recent Activity:

New Members 6
New Files 1

Visit Your Group

Search the official Complete Avid-L archives at: http://archives.bengrosser.com/avid/

Switch to: Text-Only, Daily Digest • Unsubscribe • Terms of Use

__,_._,___

[Avid-L2] Was Can't resize Timeline Window. Now 6.0.1 TT weirdness.

2012-02-11T09:30:00.001-08:00

Ah - or is it? On two Macs (one on 10.6.8 and one on 10.7.2) I find that the settings for the first graphic object in the Avid TT stay around for any other objects. If I make some text, change the fill colour, add a border and a shadow etc, when I deselect that object and start a new one, the same settings are applied so each parameter has to be reset. In earlier versions this only happened if you changed parameters with the selection tool active but no object selected. This is a right PITA, especially the shadow as if softness has been applied, it means going into the Object menu and setting the value to zero.

On 11 Feb 2012, at 14:39, Jeff Krebs wrote:

> At least title tool was fixed - could not access the controls in the 6.0
> release
>
> On Fri, Feb 10, 2012 at 9:27 AM, Roger Shufflebottom <rogershuff@yahoo.co.uk
>> wrote:
>
>> **
>>
>>
>> OK - thanks - I trashed settings and made a new User and it is stil
>> there - bin extremity sticks to edge of monitor.
>>
>>
>> On 10/02/2012 14:17, Benjamin Hershleder wrote:
>>>
>>>
>>> Hi Roger,
>>> I reverted to 6.0.0 and this resizing bug went away.
>>> It's actually a known issue and a bug report has been made.
>>> I guess it's sporadic and not everyone is experiencing it . . . so I'm
>> not sure what the conditions are that cause it.
>>>
>>> Cheers!
>>> B
>>>
>>>
>>> Benjamin Hershleder
>>> http://ContactBen.com
>>> http://Hershleder.com
>>>
>>> Wear It In Post!
>>> Fun T-shirts, mousepads, mugs& more
>>> for Post Production Professionals
>>> http://www.WearItInPost.com
>>>
>>> On Feb 10, 2012, at 6:00 AM, Roger Shufflebottom wrote:
>>>
>>>> Well . . . not seeing this with my Timeline but I am seeing it with a
>>>> bin with several other tabbed bins in there. Drag bottom corner out a
>>>> little and it jams. I can move it around but not resize it. May be a
>>>> user setting issue as I see it in one location with one bunch of
>>>> settings but not in another. Deleting bin layout makes no diffference.
>>>>
>>>> On 08/02/2012 04:20, Benjamin Hershleder wrote:
>>>>> Oliver, I couldn't find a way to unlock it other than switching to a
>> custom Timeline View I'd made which was smaller for taking screen snap
>> shots. Like you, I did notice that if I didn't make the window too big I
>> could continue to resize it, but once it touched the edge of the screen:
>> lock-o-rama.
>>>>>
>>>>> I was also concerned when out of nowhere, when I was doing nothing at
>> all (other than testing the Timeline Window resize thing), all 8 of my
>> processors jumped to about 50% and all the fans kicked in. It would't stop
>> on its own so I quit. I also decided to go back to the .0 release.
>>>>>
>>>>> Thanks for verifying that weirdness . . . nice to know it's not just
>> me ;)
>>>>>
>>>>> Cheers,
>>>>>
>>>>> B
>>>>>
>>>>>
>>>>> Benjamin Hershleder
>>>>> http://ContactBen.com
>>>>> http://Hershleder.com
>>>>>
>>>>> Wear It In Post!
>>>>> Fun T-shirts, mousepads, mugs& more
>>>>> for Post Production Professionals
>>>>> http://www.WearItInPost.com
>>>>>
>>>>> On Feb 7, 2012, at 7:22 PM, oliverpetersvidy wrote:
>>>>>
>>>>>>> Benjamin Hershleder wrote:
>>>>>>> the Timeline Window will still lock (not allow
>>>>>>> resizing) when it reaches a particular size (e.g. the
>>>>>>> exact width of my laptop screen).
>>>>>> Same thing here. If you get it too large, you can't reduce it.
>> However, what worked for me was to minimize the window and then enlarge it
>> again. This seems to let you grab the edge and scale the size again. (On a
>> Mac.) Just don't stretch it all the way to the edge.
>>>>>>
>>>>>> - Oliver
>>>>>>
>>>>>>
>>>>>
>>>>> [Non-text portions of this message have been removed]
>>>>>
>>>>>
>>>>>
>>>>> ------------------------------------
>>>>>
>>>>> Search the official Complete Avid-L archives at:
>> http://archives.bengrosser.com/avid/
>>>>> Yahoo! Groups Links
>>>>>
>>>>>
>>>>>
>>>> --
>>>> With Best Wishes,
>>>> Roger Shufflebottom
>>>> +44 7973 543660
>>>>
>>>> [Non-text portions of this message have been removed]
>>>>
>>>>
>>>
>>>
>>> [Non-text portions of this message have been removed]
>>>
>>>
>>>
>>> ------------------------------------
>>>
>>> Search the official Complete Avid-L archives at:
>> http://archives.bengrosser.com/avid/
>>> Yahoo! Groups Links
>>>
>>>
>>>
>>
>> --
>> With Best Wishes,
>> Roger Shufflebottom
>> +44 7973 543660
>>
>> [Non-text portions of this message have been removed]
>>
>>
>>
>
>
> [Non-text portions of this message have been removed]
>
>
>
> ------------------------------------
>
> Search the official Complete Avid-L archives at: http://archives.bengrosser.com/avid/
> Yahoo! Groups Links
>
>
>

With best wishes,
Roger Shufflebottom
rogershuff@yahoo.co.uk
+44 7973 543 660

__._,_.___

Reply to sender | Reply to group | Reply via web post | Start a New Topic

Messages in this topic (13)

Recent Activity:

New Members 6
New Files 1

Visit Your Group

Search the official Complete Avid-L archives at: http://archives.bengrosser.com/avid/

Switch to: Text-Only, Daily Digest • Unsubscribe • Terms of Use

__,_._,___

Re: [Avid-L2] Re: Seagate Go flex issues

2012-02-11T09:27:00.000-08:00

Thanks for info

Sent from my iPhone

On Feb 11, 2012, at 8:41 AM, "David" <k27usa@yahoo.com> wrote:

> Lou - we've been using GoFlex for Mac, 2TB (both the silver & the black ones) for some of our "remote" based projects and have NOT had only so-so luck with them. It's ironic because I have just now returned from my local Apple store where I just picked up a Hitachi G-Tech 2TB drive, as we are experiencing very similar issues with a GoFlex for Mac, 2TB (silver color) using the same specs as you, FW 800.
> FWIW, the 'silver' ones seem FAR MORE problematic than the BLACK ones do.
>
> Sorry I can't offer any more specific info, just know you're not alone with the Seagate GoFlex dive issues. I've also seen posts here on the L that basically say the same thing - avoid the Seagate GoFlex drives whenever possible.
>
> Good Luck,
>
> Dave B
>
> --- In Avid-L2@yahoogroups.com, Lou Wirth <loutv@...> wrote:
> >
> > I just got a Seagate, GoFlex for Mac, 3TB to dump some overflow media onto for a while. Trying to copy media mover offline folder. Right now about 750 Gigs. But it only goes for a few minutes and then it stops giving me the "media mover can't copy, files in use" error.
> >
> > Not sure if this is a file size issue or drive issue. Firewire 800 connection. After that error, if I go to dump the files, I get "error -50) Have to restart to dump the files off the seagate.
> >
> > Drive was formatted with Mac Drive utility.
> >
> > thanks
> > Lou
> > Lou Wirth Productions
> > 500Tamal Plaza, Suite 522
> > Corte Madera, CA 94925
> > www.louwirth.com
> > 415-924-9411p
> >
>
>

[Non-text portions of this message have been removed]

__._,_.___

Reply to sender | Reply to group | Reply via web post | Start a New Topic

Messages in this topic (3)

Recent Activity:

New Members 6
New Files 1

Visit Your Group

Search the official Complete Avid-L archives at: http://archives.bengrosser.com/avid/

Switch to: Text-Only, Daily Digest • Unsubscribe • Terms of Use

__,_._,___

[Avid-L2] Re: Seagate Go flex issues

2012-02-11T08:41:00.001-08:00

Lou - we've been using GoFlex for Mac, 2TB (both the silver & the black ones) for some of our "remote" based projects and have NOT had only so-so luck with them. It's ironic because I have just now returned from my local Apple store where I just picked up a Hitachi G-Tech 2TB drive, as we are experiencing very similar issues with a GoFlex for Mac, 2TB (silver color) using the same specs as you, FW 800.
FWIW, the 'silver' ones seem FAR MORE problematic than the BLACK ones do.

Sorry I can't offer any more specific info, just know you're not alone with the Seagate GoFlex dive issues. I've also seen posts here on the L that basically say the same thing - avoid the Seagate GoFlex drives whenever possible.

Good Luck,

Dave B

--- In Avid-L2@yahoogroups.com, Lou Wirth <loutv@...> wrote:
>
> I just got a Seagate, GoFlex for Mac, 3TB to dump some overflow media onto for a while. Trying to copy media mover offline folder. Right now about 750 Gigs. But it only goes for a few minutes and then it stops giving me the "media mover can't copy, files in use" error.
>
> Not sure if this is a file size issue or drive issue. Firewire 800 connection. After that error, if I go to dump the files, I get "error -50) Have to restart to dump the files off the seagate.
>
> Drive was formatted with Mac Drive utility.
>
> thanks
> Lou
> Lou Wirth Productions
> 500Tamal Plaza, Suite 522
> Corte Madera, CA 94925
> www.louwirth.com
> 415-924-9411p
>

__._,_.___

Reply to sender | Reply to group | Reply via web post | Start a New Topic

Messages in this topic (2)

Recent Activity:

New Members 6
New Files 1

Visit Your Group

Search the official Complete Avid-L archives at: http://archives.bengrosser.com/avid/

Switch to: Text-Only, Daily Digest • Unsubscribe • Terms of Use

__,_._,___

[Avid-L2] OT: North American Spanish Translation

2012-02-11T08:04:00.001-08:00

Good Morning All -

Looking for recommendations on getting a translation to North American Spanish, and VO cut for a 5
-7 minute training video.

My Spanish is good enough that I can probably replace the English track without too much trouble,
but I need the translation and read done, and I need a rough cost to tell the client. MP3
delivery over the web is fine. Video in English can be provided for a reference.

Thanks!
Mark

--
S.R. Productions
195 W Broad St
Salunga PA 17538
717-393-5504 / Cell 717-203-0976

__._,_.___

Reply to sender | Reply to group | Reply via web post | Start a New Topic

Messages in this topic (1)

Recent Activity:

New Members 6
New Files 1

Visit Your Group

Search the official Complete Avid-L archives at: http://archives.bengrosser.com/avid/

Switch to: Text-Only, Daily Digest • Unsubscribe • Terms of Use

__,_._,___

Re: [Avid-L2] Re: Update to 6.01 = Can't resize Timeline Window

2012-02-11T06:39:00.000-08:00

At least title tool was fixed - could not access the controls in the 6.0
release

On Fri, Feb 10, 2012 at 9:27 AM, Roger Shufflebottom <rogershuff@yahoo.co.uk
> wrote:

> **
>
>
> OK - thanks - I trashed settings and made a new User and it is stil
> there - bin extremity sticks to edge of monitor.
>
>
> On 10/02/2012 14:17, Benjamin Hershleder wrote:
> >
> >
> > Hi Roger,
> > I reverted to 6.0.0 and this resizing bug went away.
> > It's actually a known issue and a bug report has been made.
> > I guess it's sporadic and not everyone is experiencing it . . . so I'm
> not sure what the conditions are that cause it.
> >
> > Cheers!
> > B
> >
> >
> > Benjamin Hershleder
> > http://ContactBen.com
> > http://Hershleder.com
> >
> > Wear It In Post!
> > Fun T-shirts, mousepads, mugs& more
> > for Post Production Professionals
> > http://www.WearItInPost.com
> >
> > On Feb 10, 2012, at 6:00 AM, Roger Shufflebottom wrote:
> >
> >> Well . . . not seeing this with my Timeline but I am seeing it with a
> >> bin with several other tabbed bins in there. Drag bottom corner out a
> >> little and it jams. I can move it around but not resize it. May be a
> >> user setting issue as I see it in one location with one bunch of
> >> settings but not in another. Deleting bin layout makes no diffference.
> >>
> >> On 08/02/2012 04:20, Benjamin Hershleder wrote:
> >>> Oliver, I couldn't find a way to unlock it other than switching to a
> custom Timeline View I'd made which was smaller for taking screen snap
> shots. Like you, I did notice that if I didn't make the window too big I
> could continue to resize it, but once it touched the edge of the screen:
> lock-o-rama.
> >>>
> >>> I was also concerned when out of nowhere, when I was doing nothing at
> all (other than testing the Timeline Window resize thing), all 8 of my
> processors jumped to about 50% and all the fans kicked in. It would't stop
> on its own so I quit. I also decided to go back to the .0 release.
> >>>
> >>> Thanks for verifying that weirdness . . . nice to know it's not just
> me ;)
> >>>
> >>> Cheers,
> >>>
> >>> B
> >>>
> >>>
> >>> Benjamin Hershleder
> >>> http://ContactBen.com
> >>> http://Hershleder.com
> >>>
> >>> Wear It In Post!
> >>> Fun T-shirts, mousepads, mugs& more
> >>> for Post Production Professionals
> >>> http://www.WearItInPost.com
> >>>
> >>> On Feb 7, 2012, at 7:22 PM, oliverpetersvidy wrote:
> >>>
> >>>>> Benjamin Hershleder wrote:
> >>>>> the Timeline Window will still lock (not allow
> >>>>> resizing) when it reaches a particular size (e.g. the
> >>>>> exact width of my laptop screen).
> >>>> Same thing here. If you get it too large, you can't reduce it.
> However, what worked for me was to minimize the window and then enlarge it
> again. This seems to let you grab the edge and scale the size again. (On a
> Mac.) Just don't stretch it all the way to the edge.
> >>>>
> >>>> - Oliver
> >>>>
> >>>>
> >>>
> >>> [Non-text portions of this message have been removed]
> >>>
> >>>
> >>>
> >>> ------------------------------------
> >>>
> >>> Search the official Complete Avid-L archives at:
> http://archives.bengrosser.com/avid/
> >>> Yahoo! Groups Links
> >>>
> >>>
> >>>
> >> --
> >> With Best Wishes,
> >> Roger Shufflebottom
> >> +44 7973 543660
> >>
> >> [Non-text portions of this message have been removed]
> >>
> >>
> >
> >
> > [Non-text portions of this message have been removed]
> >
> >
> >
> > ------------------------------------
> >
> > Search the official Complete Avid-L archives at:
> http://archives.bengrosser.com/avid/
> > Yahoo! Groups Links
> >
> >
> >
>
> --
> With Best Wishes,
> Roger Shufflebottom
> +44 7973 543660
>
> [Non-text portions of this message have been removed]
>
>
>

[Non-text portions of this message have been removed]

------------------------------------

Search the official Complete Avid-L archives at: http://archives.bengrosser.com/avid/
Yahoo! Groups Links

<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/Avid-L2/

<*> Your email settings:
Individual Email | Traditional

<*> To change settings online go to:
http://groups.yahoo.com/group/Avid-L2/join
(Yahoo! ID required)

<*> To change settings via email:
Avid-L2-digest@yahoogroups.com
Avid-L2-fullfeatured@yahoogroups.com

<*> To unsubscribe from this group, send an email to:
Avid-L2-unsubscribe@yahoogroups.com

<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/

Re: [Avid-L2] translating subtitles

2012-02-11T02:34:00.000-08:00

Subbits can read STL and output for Avid (and a lot of other formats...)..
But, Avid itself can output a simple text file, looking like this:

<begin subtitles>
00:00:01;00 00:00:02;15
line one
line two

00:00:03;00 00:00:5;22
title two, just one line

<end subtitles>

So, if you want to translate a show with subcap and want to be cheap, export
this,
translate the lines in any text editor (do respect the line break and empty
lines, do not toch the TC's),
import and be done with it.

Bouke

VideoToolShed
van Oldenbarneveltstraat 33
6512 AS NIJMEGEN
The Netherlands
+31 24 3553311
www.videotoolshed.com
For large files:
http://dropbox.yousendit.com/BoukeVahl998172

----- Original Message -----
From: "Lou Wirth" <loutv@mindspring.com>
To: <Avid-L2@yahoogroups.com>
Sent: Friday, February 10, 2012 6:25 PM
Subject: Re: [Avid-L2] translating subtitles

> Well I was hoping to find some translation software that would convert the
> exported .stl file. Then I reimport and all is in the right place.
>
> Not much out there for Macs that offers that.
>
> Lou
> On Feb 10, 2012, at 9:14 AM, Bogdan Grigoresco wrote:
>
>> writing the mandarin/japanese characters in Avid, that is.
>> Isn't this what you're after?
>>
>> B.
>>
>> --- On Fri, 2/10/12, Lou Wirth <loutv@mindspring.com> wrote:
>>
>> From: Lou Wirth <loutv@mindspring.com>
>> Subject: Re: [Avid-L2] translating subtitles
>> To: Avid-L2@yahoogroups.com
>> Date: Friday, February 10, 2012, 8:53 AM
>>
>> Bogdan
>>
>> What does? Not sure I get what you are talking about.
>>
>> Lou
>> On Feb 9, 2012, at 1:35 PM, Bogdan Grigoresco wrote:
>>
>> > works directly with Avid Subcap effect if you have MS Unicode font
>> > installed,
>> >
>> > cheers,
>> > Bogdan Grigoresco
>> > Sr.Engineer, ACSR DS/Unity
>> > www.finale.tv
>> >
>> > --- On Thu, 2/9/12, Lou Wirth <loutv@mindspring.com> wrote:
>> >
>> > From: Lou Wirth <loutv@mindspring.com>
>> > Subject: [Avid-L2] translating subtitles
>> > To: Avid-L2@yahoogroups.com
>> > Date: Thursday, February 9, 2012, 1:19 PM
>> >
>> >
>> >
>> > I have a video project, subtitled in English for hearing impaired, that
>> > needs to be translated into several foreign languages including
>> > Japanese and Mandarin.
>> >
>> > Can anyone suggest a workflow, software or service for this type of
>> > thing? The current subtitles where done in Avid but I realize I may
>> > have to make new slugs in photoshop if I can't write the characters in
>> > Avid.
>> >
>> > thanks
>> >
>> > Lou
>> >
>> > Lou Wirth Productions
>> >
>> > 500Tamal Plaza, Suite 522
>> >
>> > Corte Madera, CA 94925
>> >
>> > www.louwirth.com
>> >
>> > 415-924-9411p
>> >
>> > [Non-text portions of this message have been removed]
>> >
>> >
>>
>> Lou Wirth Productions
>> 500Tamal Plaza, Suite 522
>> Corte Madera, CA 94925
>> www.louwirth.com
>> 415-924-9411p
>>
>>
>> [Non-text portions of this message have been removed]
>>
>> ------------------------------------
>>
>> Search the official Complete Avid-L archives at:
>> http://archives.bengrosser.com/avid/
>> Yahoo! Groups Links
>>
>> [Non-text portions of this message have been removed]
>>
>>
>
> Lou Wirth Productions
> 500Tamal Plaza, Suite 522
> Corte Madera, CA 94925
> www.louwirth.com
> 415-924-9411p
>
>
>
>
>
>
>
> [Non-text portions of this message have been removed]
>
>
>
> ------------------------------------
>
> Search the official Complete Avid-L archives at:
> http://archives.bengrosser.com/avid/
> Yahoo! Groups Links
>
>
>

__._,_.___

Reply to sender | Reply to group | Reply via web post | Start a New Topic

Messages in this topic (8)

Recent Activity:

New Members 6
New Files 1

Visit Your Group

Search the official Complete Avid-L archives at: http://archives.bengrosser.com/avid/

Switch to: Text-Only, Daily Digest • Unsubscribe • Terms of Use

__,_._,___

Re: [Avid-L2] Actual duration in a 23.98 Project?

2012-02-10T16:52:00.000-08:00

John,

I usually have set up in the TimeCode window a separate display line for
Mas 30 DF. This gives me both the 23.98 TC as in the master sequence and
what its equivalent is in 30 DFTC (real running time) *provided* that my
program starts at the exact head of the sequence. Makes it easier I think
when you're laying out a cut to know exactly how far away you are from
44:50 running time.

And yes, the center duration (and I/O in the timecode window) show the
count at 24TC regardless.

-Mark

On Fri, Feb 10, 2012 at 5:17 PM, John Moore <bigfish@pacbell.net> wrote:

> **
>
>
> To figure out the actual running time in a 23.98 project the technique
> I've heard used is to take the master sequence code and switch it to 30DF.
> Then the segment that starts at 1;00;00;00 will have an actual duration of
> the ending time code. This makes sense but when looking at the timeline
> for an entire show that ends at 1:44:50:00 in 24 frame code then the end
> frame jumps to 1;44;52;13 ish when viewed in 30 DF mode. I get why that
> happens just like the drop vs non drop difference in 30 frame code
> happens. The curiosity is that the "Center Duration" calculation still
> shows a duration of 44:50 after marking and in and out. Does the center
> duration always calculate based on the 24 frame master code of the sequence
> regardless of whether you toggle the sequence timecode to 30DF? I'm
> thinking that it does, at least that's what we are seeing. Can anyone
> confirm or deny?
>
> John Moore
>
> Barking Trout Productions
>
> Studio City, CA
>
> bigfish@pacbell.net
>
> [Non-text portions of this message have been removed]
>
>
>

[Non-text portions of this message have been removed]

------------------------------------

Search the official Complete Avid-L archives at: http://archives.bengrosser.com/avid/
Yahoo! Groups Links

<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/Avid-L2/

<*> Your email settings:
Individual Email | Traditional

<*> To change settings online go to:
http://groups.yahoo.com/group/Avid-L2/join
(Yahoo! ID required)

<*> To change settings via email:
Avid-L2-digest@yahoogroups.com
Avid-L2-fullfeatured@yahoogroups.com

<*> To unsubscribe from this group, send an email to:
Avid-L2-unsubscribe@yahoogroups.com

<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/

[Avid-L2] Seagate Go flex issues

2012-02-10T14:47:00.001-08:00

I just got a Seagate, GoFlex for Mac, 3TB to dump some overflow media onto for a while. Trying to copy media mover offline folder. Right now about 750 Gigs. But it only goes for a few minutes and then it stops giving me the "media mover can't copy, files in use" error.

Not sure if this is a file size issue or drive issue. Firewire 800 connection. After that error, if I go to dump the files, I get "error -50) Have to restart to dump the files off the seagate.

Drive was formatted with Mac Drive utility.

thanks
Lou
Lou Wirth Productions
500Tamal Plaza, Suite 522
Corte Madera, CA 94925
www.louwirth.com
415-924-9411p

__._,_.___

Reply to sender | Reply to group | Reply via web post | Start a New Topic

Messages in this topic (1)

Recent Activity:

New Members 6
New Files 1

Visit Your Group

Search the official Complete Avid-L archives at: http://archives.bengrosser.com/avid/

Switch to: Text-Only, Daily Digest • Unsubscribe • Terms of Use

__,_._,___

[Avid-L2] Actual duration in a 23.98 Project?

2012-02-10T14:17:00.001-08:00

To figure out the actual running time in a 23.98 project the technique I've heard used is to take the master sequence code and switch it to 30DF. Then the segment that starts at 1;00;00;00 will have an actual duration of the ending time code. This makes sense but when looking at the timeline for an entire show that ends at 1:44:50:00 in 24 frame code then the end frame jumps to 1;44;52;13 ish when viewed in 30 DF mode. I get why that happens just like the drop vs non drop difference in 30 frame code happens. The curiosity is that the "Center Duration" calculation still shows a duration of 44:50 after marking and in and out. Does the center duration always calculate based on the 24 frame master code of the sequence regardless of whether you toggle the sequence timecode to 30DF? I'm thinking that it does, at least that's what we are seeing. Can anyone confirm or deny?

John Moore

Barking Trout Productions

Studio City, CA

bigfish@pacbell.net

[Non-text portions of this message have been removed]

__._,_.___

Reply to sender | Reply to group | Reply via web post | Start a New Topic

Messages in this topic (1)

Recent Activity:

New Members 6
New Files 1

Visit Your Group

Search the official Complete Avid-L archives at: http://archives.bengrosser.com/avid/

Switch to: Text-Only, Daily Digest • Unsubscribe • Terms of Use

__,_._,___

Re: [Avid-L2] [OT] - Editor Humor (for Roger that'd be Humour)

2012-02-10T12:47:00.001-08:00

On Fri, Feb 10, 2012 at 2:15 PM, David Ross <speckydave@gmail.com> wrote:

> **
>
>
> There's already a "shit VFX artists say" going around that's worth a look.
>

http://www.youtube.com/watch?v=QEkuHBpvJw0

Pretty much fits for editors too...

--
Tim McLaughlin
Final Cut and Avid Editor
http://vimeo.com/mcltim
www.mcltim.com

[Non-text portions of this message have been removed]

__._,_.___

Reply to sender | Reply to group | Reply via web post | Start a New Topic

Messages in this topic (4)

Recent Activity:

New Members 6
New Files 1

Visit Your Group

Search the official Complete Avid-L archives at: http://archives.bengrosser.com/avid/

Switch to: Text-Only, Daily Digest • Unsubscribe • Terms of Use

__,_._,___

Re: [Avid-L2] [OT] - Editor Humor (for Roger that'd be Humour)

2012-02-10T12:15:00.000-08:00

There's already a "shit VFX artists say" going around that's worth a look.
Don't have a link handy, so just google it.
(very NSFW)

D.

Sent from my mobile. Please excuse the spelling.

On Feb 10, 2012 7:28 PM, "Benjamin Hershleder" <Ben@contactben.com> wrote:
>
>
>
>
>
> The meme of the month has been "Sh*t [insert] Say."
> It was "Sh*t Girls Say" that started the trend:
> http://www.youtube.com/watch?v=u-yLGIH7W9Y
>
> Others have popped-up like "Sh*t New Yorkers Say."
>
> I think we need:
>
> 1. "Sh*t Editors Say"
> and
> 2. "Sh*t Avid Editors Say"
>
> Begin your submissions . . . . now.
>
> Oh, and have a good weekend everyone!
>
> B
>
> Benjamin Hershleder
> http://ContactBen.com
> http://Hershleder.com

[Non-text portions of this message have been removed]

__._,_.___

Reply to sender | Reply to group | Reply via web post | Start a New Topic

Messages in this topic (3)

Recent Activity:

New Members 6
New Files 1

Visit Your Group

Search the official Complete Avid-L archives at: http://archives.bengrosser.com/avid/

Switch to: Text-Only, Daily Digest • Unsubscribe • Terms of Use

__,_._,___

Re: [Avid-L2] [OT] - Editor Humor (for Roger that'd be Humour)

2012-02-10T11:52:00.001-08:00

I was hoping for a shit producers say or even a shit editor's say.

Love the Juliette Lewis cameo. She's one of me favs.

On Feb 10, 2012, at 2:27 PM, Benjamin Hershleder <Ben@ContactBen.com> wrote:

>
>
> The meme of the month has been "Sh*t [insert] Say."
> It was "Sh*t Girls Say" that started the trend:
> http://www.youtube.com/watch?v=u-yLGIH7W9Y
>
> Others have popped-up like "Sh*t New Yorkers Say."
>
> I think we need:
>
> 1. "Sh*t Editors Say"
> and
> 2. "Sh*t Avid Editors Say"
>
> Begin your submissions . . . . now.
>
> Oh, and have a good weekend everyone!
>
> B
>
> Benjamin Hershleder
> http://ContactBen.com
> http://Hershleder.com
>
> Wear It In Post!
> Fun T-shirts, mousepads, mugs & more
> for Post Production Professionals
> http://www.WearItInPost.com
>
> [Non-text portions of this message have been removed]
>
>
>
>
> TODAY(Beta) • Powered by Yahoo!
> Victoria's Secret model gives up her career
> At age 21, Kylie Bisutti walks away from her coveted angel wings for a very personal reason.
> Privacy Policy

[Non-text portions of this message have been removed]

__._,_.___

Reply to sender | Reply to group | Reply via web post | Start a New Topic

Messages in this topic (2)

Recent Activity:

New Members 6
New Files 1

Visit Your Group

Search the official Complete Avid-L archives at: http://archives.bengrosser.com/avid/

Switch to: Text-Only, Daily Digest • Unsubscribe • Terms of Use

__,_._,___

[Avid-L2] [OT] - Editor Humor (for Roger that'd be Humour)

2012-02-10T11:27:00.000-08:00

The meme of the month has been "Sh*t [insert] Say."
It was "Sh*t Girls Say" that started the trend:
http://www.youtube.com/watch?v=u-yLGIH7W9Y

Others have popped-up like "Sh*t New Yorkers Say."

I think we need:

1. "Sh*t Editors Say"
and
2. "Sh*t Avid Editors Say"

Begin your submissions . . . . now.

Oh, and have a good weekend everyone!

B

Benjamin Hershleder
http://ContactBen.com
http://Hershleder.com

Wear It In Post!
Fun T-shirts, mousepads, mugs & more
for Post Production Professionals
http://www.WearItInPost.com

[Non-text portions of this message have been removed]

__._,_.___

Reply to sender | Reply to group | Reply via web post | Start a New Topic

Messages in this topic (1)

Recent Activity:

New Members 6
New Files 1

Visit Your Group

Search the official Complete Avid-L archives at: http://archives.bengrosser.com/avid/

Switch to: Text-Only, Daily Digest • Unsubscribe • Terms of Use

__,_._,___

Re: [Avid-L2] translating subtitles

2012-02-10T11:11:00.001-08:00

I mean the conversion, not the translation.

B.

--- On Fri, 2/10/12, Lou Wirth <loutv@mindspring.com> wrote:

From: Lou Wirth <loutv@mindspring.com>
Subject: Re: [Avid-L2] translating subtitles
To: Avid-L2@yahoogroups.com
Date: Friday, February 10, 2012, 9:25 AM

Well I was hoping to find some translation software that would convert the exported .stl file. Then I reimport and all is in the right place.

Not much out there for Macs that offers that.

Lou
On Feb 10, 2012, at 9:14 AM, Bogdan Grigoresco wrote:

> writing the mandarin/japanese characters in Avid, that is.
> Isn't this what you're after?
>
> B.
>
> --- On Fri, 2/10/12, Lou Wirth <loutv@mindspring.com> wrote:
>
> From: Lou Wirth <loutv@mindspring.com>
> Subject: Re: [Avid-L2] translating subtitles
> To: Avid-L2@yahoogroups.com
> Date: Friday, February 10, 2012, 8:53 AM
>
> Bogdan
>
> What does?   Not sure I get what you are talking about.
>
> Lou
> On Feb 9, 2012, at 1:35 PM, Bogdan Grigoresco wrote:
>
> > works directly with Avid Subcap effect if you have MS Unicode font installed,
> >
> > cheers,
> > Bogdan Grigoresco
> > Sr.Engineer, ACSR DS/Unity
> > www.finale.tv
> >
> > --- On Thu, 2/9/12, Lou Wirth <loutv@mindspring.com> wrote:
> >
> > From: Lou Wirth <loutv@mindspring.com>
> > Subject: [Avid-L2] translating subtitles
> > To: Avid-L2@yahoogroups.com
> > Date: Thursday, February 9, 2012, 1:19 PM
> >
> >
> >
> > I have a video project, subtitled in English for hearing impaired, that needs to be translated into several foreign languages including Japanese and Mandarin.
> >
> > Can anyone suggest a workflow, software or service for this type of thing? The current subtitles where done in Avid but I realize I may have to make new slugs in photoshop if I can't write the characters in Avid.
> >
> > thanks
> >
> > Lou
> >
> > Lou Wirth Productions
> >
> > 500Tamal Plaza, Suite 522
> >
> > Corte Madera, CA 94925
> >
> > www.louwirth.com
> >
> > 415-924-9411p
> >
> > [Non-text portions of this message have been removed]
> >
> >
>
> Lou Wirth Productions
> 500Tamal Plaza, Suite 522
> Corte Madera, CA 94925
> www.louwirth.com
> 415-924-9411p
>
>
> [Non-text portions of this message have been removed]
>
> ------------------------------------
>
> Search the official Complete Avid-L archives at:   http://archives.bengrosser.com/avid/
> Yahoo! Groups Links
>
> [Non-text portions of this message have been removed]
>
>

Lou Wirth Productions
500Tamal Plaza, Suite 522
Corte Madera, CA 94925
www.louwirth.com
415-924-9411p

[Non-text portions of this message have been removed]

------------------------------------

Search the official Complete Avid-L archives at:   http://archives.bengrosser.com/avid/
Yahoo! Groups Links

[Non-text portions of this message have been removed]

__._,_.___

Reply to sender | Reply to group | Reply via web post | Start a New Topic

Messages in this topic (7)

Recent Activity:

New Members 6
New Files 1

Visit Your Group

Search the official Complete Avid-L archives at: http://archives.bengrosser.com/avid/

Switch to: Text-Only, Daily Digest • Unsubscribe • Terms of Use

__,_._,___

Re: [Avid-L2] translating subtitles

2012-02-10T11:10:00.001-08:00

MacCaption and Caption maker(win) will do it

B.

--- On Fri, 2/10/12, Lou Wirth <loutv@mindspring.com> wrote:

From: Lou Wirth <loutv@mindspring.com>
Subject: Re: [Avid-L2] translating subtitles
To: Avid-L2@yahoogroups.com
Date: Friday, February 10, 2012, 9:25 AM

Well I was hoping to find some translation software that would convert the exported .stl file. Then I reimport and all is in the right place.

Not much out there for Macs that offers that.

Lou
On Feb 10, 2012, at 9:14 AM, Bogdan Grigoresco wrote:

> writing the mandarin/japanese characters in Avid, that is.
> Isn't this what you're after?
>
> B.
>
> --- On Fri, 2/10/12, Lou Wirth <loutv@mindspring.com> wrote:
>
> From: Lou Wirth <loutv@mindspring.com>
> Subject: Re: [Avid-L2] translating subtitles
> To: Avid-L2@yahoogroups.com
> Date: Friday, February 10, 2012, 8:53 AM
>
> Bogdan
>
> What does?   Not sure I get what you are talking about.
>
> Lou
> On Feb 9, 2012, at 1:35 PM, Bogdan Grigoresco wrote:
>
> > works directly with Avid Subcap effect if you have MS Unicode font installed,
> >
> > cheers,
> > Bogdan Grigoresco
> > Sr.Engineer, ACSR DS/Unity
> > www.finale.tv
> >
> > --- On Thu, 2/9/12, Lou Wirth <loutv@mindspring.com> wrote:
> >
> > From: Lou Wirth <loutv@mindspring.com>
> > Subject: [Avid-L2] translating subtitles
> > To: Avid-L2@yahoogroups.com
> > Date: Thursday, February 9, 2012, 1:19 PM
> >
> >
> >
> > I have a video project, subtitled in English for hearing impaired, that needs to be translated into several foreign languages including Japanese and Mandarin.
> >
> > Can anyone suggest a workflow, software or service for this type of thing? The current subtitles where done in Avid but I realize I may have to make new slugs in photoshop if I can't write the characters in Avid.
> >
> > thanks
> >
> > Lou
> >
> > Lou Wirth Productions
> >
> > 500Tamal Plaza, Suite 522
> >
> > Corte Madera, CA 94925
> >
> > www.louwirth.com
> >
> > 415-924-9411p
> >
> > [Non-text portions of this message have been removed]
> >
> >
>
> Lou Wirth Productions
> 500Tamal Plaza, Suite 522
> Corte Madera, CA 94925
> www.louwirth.com
> 415-924-9411p
>
>
> [Non-text portions of this message have been removed]
>
> ------------------------------------
>
> Search the official Complete Avid-L archives at:   http://archives.bengrosser.com/avid/
> Yahoo! Groups Links
>
> [Non-text portions of this message have been removed]
>
>

Lou Wirth Productions
500Tamal Plaza, Suite 522
Corte Madera, CA 94925
www.louwirth.com
415-924-9411p

[Non-text portions of this message have been removed]

------------------------------------

Search the official Complete Avid-L archives at:   http://archives.bengrosser.com/avid/
Yahoo! Groups Links

[Non-text portions of this message have been removed]

__._,_.___

Reply to sender | Reply to group | Reply via web post | Start a New Topic

Messages in this topic (6)

Recent Activity:

New Members 6
New Files 1

Visit Your Group

Search the official Complete Avid-L archives at: http://archives.bengrosser.com/avid/

Switch to: Text-Only, Daily Digest • Unsubscribe • Terms of Use

__,_._,___

Re: [Avid-L2] Should Google buy Avid...

2012-02-10T10:41:00.001-08:00

POTM!

Great Mike.

Jim

On Feb 10, 2012, at 10:08 AM, Michael Towe wrote:

> First thing they would do is bring the old "Lift" button back. Then after you use it 20 times you would start seeing ads for gym memberships showing up in the title tool.
>
> One could only imagine what type of ads would start showing up after over use of the "Trim Tail" button!

__._,_.___

Reply to sender | Reply to group | Reply via web post | Start a New Topic

Messages in this topic (7)

Recent Activity:

New Members 6
New Files 1

Visit Your Group

Search the official Complete Avid-L archives at: http://archives.bengrosser.com/avid/

Switch to: Text-Only, Daily Digest • Unsubscribe • Terms of Use

__,_._,___

Re: [Avid-L2] Should Google buy Avid...

2012-02-10T10:14:00.000-08:00

Tea on my computer scree again. Thanks Mike! --J.B.

Michael Towe wrote:
> First thing they would do is bring the old "Lift" button back. Then after you use it 20 times you would start seeing ads for gym memberships showing up in the title tool.
>
> One could only imagine what type of ads would start showing up after over use of the "Trim Tail" button!
>
> Mike
> M2 Digital Post
> San Diego, CA.
>
>
>
> On Feb 10, 2012, at 8:32 AM, Terence Curren wrote:
>
>
>> Forbes thinks so.
>>
>> http://tinyurl.com/87egtnb
>>
>>
>>
>
>
> [Non-text portions of this message have been removed]
>
>
>
> ------------------------------------
>
> Search the official Complete Avid-L archives at: http://archives.bengrosser.com/avid/
> Yahoo! Groups Links
>
>
>
>
>

__._,_.___

Reply to sender | Reply to group | Reply via web post | Start a New Topic

Messages in this topic (6)

Recent Activity:

New Members 6
New Files 1

Visit Your Group

Search the official Complete Avid-L archives at: http://archives.bengrosser.com/avid/

Switch to: Text-Only, Daily Digest • Unsubscribe • Terms of Use

__,_._,___

Re: [Avid-L2] Should Google buy Avid...

2012-02-10T10:13:00.001-08:00

stupid.
Owen

On Feb 10, 2012, at 12:20 PM, Scott Ham wrote:

> On Fri, Feb 10, 2012 at 11:32 AM, Terence Curren <tcurren@aol.com> wrote:
>
> > **
> >
> >
> > Forbes thinks so.
> >
> > http://tinyurl.com/87egtnb
> >
>
> I find myself less than enthused with Google's products. They don't seem to
> be able to provide a cohesive experience through the web. I fear what they
> would do across a product line.
>
> Of course, the financial backing would be nice...
>
> [Non-text portions of this message have been removed]
>
>

[Non-text portions of this message have been removed]

------------------------------------

Search the official Complete Avid-L archives at: http://archives.bengrosser.com/avid/
Yahoo! Groups Links

<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/Avid-L2/

<*> Your email settings:
Individual Email | Traditional

<*> To change settings online go to:
http://groups.yahoo.com/group/Avid-L2/join
(Yahoo! ID required)

<*> To change settings via email:
Avid-L2-digest@yahoogroups.com
Avid-L2-fullfeatured@yahoogroups.com

<*> To unsubscribe from this group, send an email to:
Avid-L2-unsubscribe@yahoogroups.com

<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/

Re: [Avid-L2] Should Google buy Avid...

2012-02-10T10:08:00.001-08:00

First thing they would do is bring the old "Lift" button back. Then after you use it 20 times you would start seeing ads for gym memberships showing up in the title tool.

One could only imagine what type of ads would start showing up after over use of the "Trim Tail" button!

Mike
M2 Digital Post
San Diego, CA.

On Feb 10, 2012, at 8:32 AM, Terence Curren wrote:

> Forbes thinks so.
>
> http://tinyurl.com/87egtnb
>
>

[Non-text portions of this message have been removed]

------------------------------------

Search the official Complete Avid-L archives at: http://archives.bengrosser.com/avid/
Yahoo! Groups Links

<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/Avid-L2/

<*> Your email settings:
Individual Email | Traditional

<*> To change settings online go to:
http://groups.yahoo.com/group/Avid-L2/join
(Yahoo! ID required)

<*> To change settings via email:
Avid-L2-digest@yahoogroups.com
Avid-L2-fullfeatured@yahoogroups.com

<*> To unsubscribe from this group, send an email to:
Avid-L2-unsubscribe@yahoogroups.com

<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/

Re: [Avid-L2] Should Google buy Avid...

2012-02-10T10:01:00.001-08:00

No. And HELL NO.
--
Tim McLaughlin
Final Cut and Avid Editor
http://vimeo.com/mcltim
www.mcltim.com

On Fri, Feb 10, 2012 at 10:32 AM, Terence Curren <tcurren@aol.com> wrote:

> **
>
>
> Forbes thinks so.
>
> http://tinyurl.com/87egtnb
>
>

[Non-text portions of this message have been removed]

__._,_.___

Reply to sender | Reply to group | Reply via web post | Start a New Topic

Messages in this topic (3)

Recent Activity:

New Members 6
New Files 1

Visit Your Group

Search the official Complete Avid-L archives at: http://archives.bengrosser.com/avid/

Switch to: Text-Only, Daily Digest • Unsubscribe • Terms of Use

__,_._,___

Re: [Avid-L2] translating subtitles

2012-02-10T09:25:00.001-08:00

Well I was hoping to find some translation software that would convert the exported .stl file. Then I reimport and all is in the right place.

Not much out there for Macs that offers that.

Lou
On Feb 10, 2012, at 9:14 AM, Bogdan Grigoresco wrote:

> writing the mandarin/japanese characters in Avid, that is.
> Isn't this what you're after?
>
> B.
>
> --- On Fri, 2/10/12, Lou Wirth <loutv@mindspring.com> wrote:
>
> From: Lou Wirth <loutv@mindspring.com>
> Subject: Re: [Avid-L2] translating subtitles
> To: Avid-L2@yahoogroups.com
> Date: Friday, February 10, 2012, 8:53 AM
>
> Bogdan
>
> What does? Not sure I get what you are talking about.
>
> Lou
> On Feb 9, 2012, at 1:35 PM, Bogdan Grigoresco wrote:
>
> > works directly with Avid Subcap effect if you have MS Unicode font installed,
> >
> > cheers,
> > Bogdan Grigoresco
> > Sr.Engineer, ACSR DS/Unity
> > www.finale.tv
> >
> > --- On Thu, 2/9/12, Lou Wirth <loutv@mindspring.com> wrote:
> >
> > From: Lou Wirth <loutv@mindspring.com>
> > Subject: [Avid-L2] translating subtitles
> > To: Avid-L2@yahoogroups.com
> > Date: Thursday, February 9, 2012, 1:19 PM
> >
> >
> >
> > I have a video project, subtitled in English for hearing impaired, that needs to be translated into several foreign languages including Japanese and Mandarin.
> >
> > Can anyone suggest a workflow, software or service for this type of thing? The current subtitles where done in Avid but I realize I may have to make new slugs in photoshop if I can't write the characters in Avid.
> >
> > thanks
> >
> > Lou
> >
> > Lou Wirth Productions
> >
> > 500Tamal Plaza, Suite 522
> >
> > Corte Madera, CA 94925
> >
> > www.louwirth.com
> >
> > 415-924-9411p
> >
> > [Non-text portions of this message have been removed]
> >
> >
>
> Lou Wirth Productions
> 500Tamal Plaza, Suite 522
> Corte Madera, CA 94925
> www.louwirth.com
> 415-924-9411p
>
>
> [Non-text portions of this message have been removed]
>
> ------------------------------------
>
> Search the official Complete Avid-L archives at: http://archives.bengrosser.com/avid/
> Yahoo! Groups Links
>
> [Non-text portions of this message have been removed]
>
>

Lou Wirth Productions
500Tamal Plaza, Suite 522
Corte Madera, CA 94925
www.louwirth.com
415-924-9411p

[Non-text portions of this message have been removed]

------------------------------------

Search the official Complete Avid-L archives at: http://archives.bengrosser.com/avid/
Yahoo! Groups Links

<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/Avid-L2/

<*> Your email settings:
Individual Email | Traditional

<*> To change settings online go to:
http://groups.yahoo.com/group/Avid-L2/join
(Yahoo! ID required)

<*> To change settings via email:
Avid-L2-digest@yahoogroups.com
Avid-L2-fullfeatured@yahoogroups.com

<*> To unsubscribe from this group, send an email to:
Avid-L2-unsubscribe@yahoogroups.com

<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/

Re: [Avid-L2] Should Google buy Avid...

2012-02-10T09:20:00.001-08:00

On Fri, Feb 10, 2012 at 11:32 AM, Terence Curren <tcurren@aol.com> wrote:

> **
>
>
> Forbes thinks so.
>
> http://tinyurl.com/87egtnb
>

I find myself less than enthused with Google's products. They don't seem to
be able to provide a cohesive experience through the web. I fear what they
would do across a product line.

Of course, the financial backing would be nice...

[Non-text portions of this message have been removed]

__._,_.___

Reply to sender | Reply to group | Reply via web post | Start a New Topic

Messages in this topic (2)

Recent Activity:

New Members 6
New Files 1

Visit Your Group

Search the official Complete Avid-L archives at: http://archives.bengrosser.com/avid/

Switch to: Text-Only, Daily Digest • Unsubscribe • Terms of Use

__,_._,___

Re: [Avid-L2] translating subtitles

2012-02-10T09:14:00.003-08:00

writing the mandarin/japanese characters in Avid, that is.
Isn't this what you're after?

B.

--- On Fri, 2/10/12, Lou Wirth <loutv@mindspring.com> wrote:

From: Lou Wirth <loutv@mindspring.com>
Subject: Re: [Avid-L2] translating subtitles
To: Avid-L2@yahoogroups.com
Date: Friday, February 10, 2012, 8:53 AM

Bogdan

What does? Not sure I get what you are talking about.

Lou
On Feb 9, 2012, at 1:35 PM, Bogdan Grigoresco wrote:

> works directly with Avid Subcap effect if you have MS Unicode font installed,
>
> cheers,
> Bogdan Grigoresco
> Sr.Engineer, ACSR DS/Unity
> www.finale.tv
>
> --- On Thu, 2/9/12, Lou Wirth <loutv@mindspring.com> wrote:
>
> From: Lou Wirth <loutv@mindspring.com>
> Subject: [Avid-L2] translating subtitles
> To: Avid-L2@yahoogroups.com
> Date: Thursday, February 9, 2012, 1:19 PM
>
>
>
> I have a video project, subtitled in English for hearing impaired, that needs to be translated into several foreign languages including Japanese and Mandarin.
>
> Can anyone suggest a workflow, software or service for this type of thing? The current subtitles where done in Avid but I realize I may have to make new slugs in photoshop if I can't write the characters in Avid.
>
> thanks
>
> Lou
>
> Lou Wirth Productions
>
> 500Tamal Plaza, Suite 522
>
> Corte Madera, CA 94925
>
> www.louwirth.com
>
> 415-924-9411p
>
> [Non-text portions of this message have been removed]
>
>

Lou Wirth Productions
500Tamal Plaza, Suite 522
Corte Madera, CA 94925
www.louwirth.com
415-924-9411p

[Non-text portions of this message have been removed]

------------------------------------

Search the official Complete Avid-L archives at: http://archives.bengrosser.com/avid/
Yahoo! Groups Links

[Non-text portions of this message have been removed]

__._,_.___

Reply to sender | Reply to group | Reply via web post | Start a New Topic

Messages in this topic (4)

Recent Activity:

New Members 6
New Files 1

Visit Your Group

Search the official Complete Avid-L archives at: http://archives.bengrosser.com/avid/

Switch to: Text-Only, Daily Digest • Unsubscribe • Terms of Use

__,_._,___

[Avid-L2] Re: Mapping F3 and F4 on Lion

2012-02-10T09:14:00.001-08:00

Thanks

--- In Avid-L2@yahoogroups.com, Benjamin Hershleder <Ben@...> wrote:
>
>
>
> System Preferences > Keyboard > USe all F1, F2 keys as standard function keys.
>
> Also:
> System Preferences > Mission Control > Set Application Windows and SHow Dashboard top something else (I just turned those off).
>
> HTH,
>
> B
>
>
> Benjamin Hershleder
> http://ContactBen.com
> http://Hershleder.com
>
> Wear It In Post!
> Fun T-shirts, mousepads, mugs & more
> for Post Production Professionals
> http://www.WearItInPost.com
>
> On Feb 10, 2012, at 8:39 AM, ksirul wrote:
>
> > A Client has MC 6 on Lion. He claims he can't map anything to F3 or F4 because of dedicated Mac function buttons. Is there a way around this?
> >
> > KEN
> >
> >
>
>
>
> [Non-text portions of this message have been removed]
>

__._,_.___

Reply to sender | Reply to group | Reply via web post | Start a New Topic

Messages in this topic (3)

Recent Activity:

New Members 6
New Files 1

Visit Your Group

Search the official Complete Avid-L archives at: http://archives.bengrosser.com/avid/

Switch to: Text-Only, Daily Digest • Unsubscribe • Terms of Use

__,_._,___

Re: [Avid-L2] Mapping F3 and F4 on Lion

2012-02-10T08:54:00.001-08:00

System Preferences > Keyboard > USe all F1, F2 keys as standard function keys.

Also:
System Preferences > Mission Control > Set Application Windows and SHow Dashboard top something else (I just turned those off).

HTH,

Benjamin Hershleder
http://ContactBen.com
http://Hershleder.com

Wear It In Post!
Fun T-shirts, mousepads, mugs & more
for Post Production Professionals
http://www.WearItInPost.com

On Feb 10, 2012, at 8:39 AM, ksirul wrote:

> A Client has MC 6 on Lion. He claims he can't map anything to F3 or F4 because of dedicated Mac function buttons. Is there a way around this?
>
> KEN
>
>

[Non-text portions of this message have been removed]

------------------------------------

Search the official Complete Avid-L archives at: http://archives.bengrosser.com/avid/
Yahoo! Groups Links

<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/Avid-L2/

<*> Your email settings:
Individual Email | Traditional

<*> To change settings online go to:
http://groups.yahoo.com/group/Avid-L2/join
(Yahoo! ID required)

<*> To change settings via email:
Avid-L2-digest@yahoogroups.com
Avid-L2-fullfeatured@yahoogroups.com

<*> To unsubscribe from this group, send an email to:
Avid-L2-unsubscribe@yahoogroups.com

<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/

Re: [Avid-L2] translating subtitles

2012-02-10T08:53:00.001-08:00

Bogdan

What does? Not sure I get what you are talking about.

Lou
On Feb 9, 2012, at 1:35 PM, Bogdan Grigoresco wrote:

> works directly with Avid Subcap effect if you have MS Unicode font installed,
>
> cheers,
> Bogdan Grigoresco
> Sr.Engineer, ACSR DS/Unity
> www.finale.tv
>
> --- On Thu, 2/9/12, Lou Wirth <loutv@mindspring.com> wrote:
>
> From: Lou Wirth <loutv@mindspring.com>
> Subject: [Avid-L2] translating subtitles
> To: Avid-L2@yahoogroups.com
> Date: Thursday, February 9, 2012, 1:19 PM
>
>
>
> I have a video project, subtitled in English for hearing impaired, that needs to be translated into several foreign languages including Japanese and Mandarin.
>
> Can anyone suggest a workflow, software or service for this type of thing? The current subtitles where done in Avid but I realize I may have to make new slugs in photoshop if I can't write the characters in Avid.
>
> thanks
>
> Lou
>
> Lou Wirth Productions
>
> 500Tamal Plaza, Suite 522
>
> Corte Madera, CA 94925
>
> www.louwirth.com
>
> 415-924-9411p
>
> [Non-text portions of this message have been removed]
>
>

Lou Wirth Productions
500Tamal Plaza, Suite 522
Corte Madera, CA 94925
www.louwirth.com
415-924-9411p

[Non-text portions of this message have been removed]

------------------------------------

Search the official Complete Avid-L archives at: http://archives.bengrosser.com/avid/
Yahoo! Groups Links

<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/Avid-L2/

<*> Your email settings:
Individual Email | Traditional

<*> To change settings online go to:
http://groups.yahoo.com/group/Avid-L2/join
(Yahoo! ID required)

<*> To change settings via email:
Avid-L2-digest@yahoogroups.com
Avid-L2-fullfeatured@yahoogroups.com

<*> To unsubscribe from this group, send an email to:
Avid-L2-unsubscribe@yahoogroups.com

<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/